Stop compromising output for control. This industrial draft power pack supplies consistent cooling capacity and robust circulation for high-volume tap operations. Designed for professional settings, the unit integrates a 1.5 HP compressor, dual circulating pumps, and a controlled glycol bath to maintain tight temperature stability across long runs.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug power and close water supply. Drain glycol bath and capture per local disposal rules. Wipe exterior and interior with mild detergent and a soft cloth. Flush pumps and lines with approved cleaner; rinse with potable water. Inspect seals, fittings, and electrical cord for damage; tighten fittings to 3/8" female NPT torque specs. Clean condenser water connections and replace corroded parts. Start unit and verify 208/230v operation and 11,500 BTU performance.#@@#Additional Info#@#Micro Matic’s MMPP4307-PKG-WC power pack offers 1.5 HP compressor performance, 11,500 BTU cooling, dual 1/3 HP pumps, an 11.5 gallon glycol bath, digital thermostat, insulated cabinet, R-404A refrigerant, and is ETL certified.#@@#General Info#@#Description #@#
Stop compromising output for control. This industrial draft power pack supplies consistent cooling capacity and robust circulation for high-volume tap operations. Designed for professional settings, the unit integrates a 1.5 HP compressor, dual circulating pumps, and a controlled glycol bath to maintain tight temperature stability across long runs.
#@@# Pumping Redundancy#@#
Two vane pumps with 1/3 HP motors supply continuous glycol circulation to header lines, reducing temperature variance during peak service. The redundant pump arrangement maintains flow if one pump requires service, ensuring operations continue without immediate shutdown.
#@@# Glycol Bath Control#@#
An 11.5-gallon glycol reservoir with an exterior sight glass simplifies fluid monitoring and reduces refill frequency for longer uninterrupted service. The digital thermostat enables precise set points, allowing staff to hold beer lines within narrow temperature bands for consistent pour quality.
#@@# Compressor Performance#@#
A 1.5 HP compressor delivers 11,500 BTU of cooling capacity using R-404A refrigerant, enabling rapid heat extraction from large draft manifolds. The system targets sustained cold chain performance for multiple taps and long runs typical in restaurants, stadiums, and bars.
#@@# Water Cooling Efficiency#@#
Water-cooled design shifts condenser heat load to an external water circuit, improving energy transfer and reducing on-site heat rejection into the service area. Facilities that offer a chilled water loop gain higher operational efficiency and steadier evaporator temperatures under continuous draw.
#@@# Serviceable Construction#@#
The insulated cabinet with cover and 3/8 inch female NPT fittings provides straightforward plumbing and service access for routine maintenance. ETL certification confirms compliance with applicable safety and sanitation standards, supporting installation in regulated commercial environments.
#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Maintain the Micro Matic MMPP4307-PKG-WC by inspecting pump couplings weekly and tightening fasteners to specification. Flush glycol bath quarterly and replace with manufacturer-approved solution, verifying 11.5 gallons fill and clear sight glass. Clean condenser water lines monthly to prevent scale; treat inlet water per CSA guidelines. Calibrate digital thermostat biannually and check compressor amps during peak load. Document service and replace worn seals promptly.
