Handle high-volume draft operations with equipment designed for continuous service and precise temperature control. This water-cooled power pack delivers 11,500 BTU cooling capacity powered by a 1.5 HP compressor and supports four lines with independent 1/3 HP circulating pumps, ensuring consistent pour quality during peak periods. Operators will find that the 11.5-gallon glycol bath and digital thermostat simplify system stability, while the insulated cabinet reduces thermal load and runtime.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug and drain the power pack before service. Remove beer lines and wipe all exterior surfaces with a mild detergent solution. Flush the 11.5 gallon glycol bath and replace with specified glycol mix; monitor level via exterior sight glass. Clean condenser and water-cooled heat exchanger to remove grease and scale; inspect pumps and 3/8" female NPT fittings for leaks. Sanitize beer-contact lines per CSA guidelines. Reconnect power only after unit dries completely.#@@#Additional Info#@#Micro Matic's MMPP4307-PKG-4-WC power pack features a 1.5 HP compressor, four 1/3 HP pumps, an 11.5 gallon glycol bath, digital thermostat, insulated cabinet, R-404A refrigerant, 11,500 BTU output, and cETLus certification.#@@#General Info#@#Description #@#
Handle high-volume draft operations with equipment designed for continuous service and precise temperature control. This water-cooled power pack delivers 11,500 BTU cooling capacity powered by a 1.5 HP compressor and supports four lines with independent 1/3 HP circulating pumps, ensuring consistent pour quality during peak periods. Operators will find that the 11.5-gallon glycol bath and digital thermostat simplify system stability, while the insulated cabinet reduces thermal load and runtime.
#@@# Cooling Capacity#@#
Deliver 11,500 BTU of cooling power to maintain draft line temperatures under heavy use. The 1.5 HP compressor operates on 208/230V 60 Hz single-phase power and requires a NEMA 6-20P connection with 30.0 amp service available, ensuring reliable performance in commercial electrical environments.
#@@# Glycol Reservoir#@#
Provide 11.5 gallons of glycol capacity with an exterior sight glass for rapid visual checks and reduced maintenance interruptions. The sizable bath sustains thermal mass for multi-tap installations, minimizing temperature drift during extended pours.
#@@# Circulation Redundancy#@#
Include four vane circulating pumps, each driven by a 1/3 HP motor, to feed multiple runs while isolating line faults and simplifying service. Technicians can isolate a single pump without decommissioning the entire system, which increases uptime and keeps service disruptions localized.
#@@# Control Precision#@#
Feature a digital thermostat for accurate setpoint management and repeatable line temperatures. Users can stabilize dispense conditions quickly and log consistent pouring metrics across shifts.
#@@# Service Compliance#@#
Meet third-party safety and performance standards with cETLus certification and R-404A refrigerant compatibility. The unit ships with 3/8 inch female NPT fittings for integration into existing manifolds and draft runs, reducing installation complexity.
#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Inspect pump bearings monthly and tighten mounting bolts to maintain alignment and reduce vibration. Flush glycol bath quarterly and replace with manufacturer-recommended mixture; verify level at the exterior sight glass and top off as needed. Clean condenser water lines biannually and confirm 208/230v supply and NEMA 6-20P connection integrity. Test digital thermostat operation and verify compressor draws within 14.5 amps. Keep cabinet insulation intact and repair worn seals promptly.
