Stop sacrificing draft quality for capacity. This glycol-cooled power pack delivers steady temperature control and continuous operation for high-volume tap systems, enabling consistent pours across multiple lines. Designed for remote installation, the unit pairs a 1.5 HP compressor with dual pumps to maintain glycol circulation under heavy load.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug power and drain glycol bath before cleaning. Remove panels and wipe surfaces with mild detergent and water, using a soft cloth to avoid scratches. Flush lines with approved sanitizer and rinse thoroughly. Clean condenser fins with a brush to remove dust and debris; check coils monthly to maintain efficiency. Inspect seals, fittings, and pumps for wear and tighten or replace parts as needed. Allow all components to dry fully before restoring power.#@@#Additional Info#@#Micro Matic's MMPP4307-PKG-R Pro-Line glycol-cooled power pack has a 1.5 HP compressor, dual pump, 11,500 BTU capacity, R-404A refrigerant, 208/230v operation, and NEMA 6-20P service; remote compressor must be within 50 feet.#@@#General Info#@#Description #@#
Stop sacrificing draft quality for capacity. This glycol-cooled power pack delivers steady temperature control and continuous operation for high-volume tap systems, enabling consistent pours across multiple lines. Designed for remote installation, the unit pairs a 1.5 HP compressor with dual pumps to maintain glycol circulation under heavy load.
#@@# Compressor Power#@#
The 1 1/2 HP compressor provides sustained cooling that supports extended service periods and multiple dispense points. Engineers select this motor size to maintain fluid temperature with a rated 11,500 BTU capacity, effectively managing thermal load in demanding environments.
#@@# Dual Pump Design#@#
The dual pump and motor configuration offers redundancy and balanced flow, reducing the risk of downtime during peak service. Operators benefit from consistent pressure and circulation, which preserves product quality across long runs of tubing.
#@@# Glycol Cooling#@#
The glycol-cooled architecture stabilizes product temperature along the dispense line, limiting foam and preserving flavor from keg to tap. Technicians calibrate the glycol bath to control line temperature precisely, enhancing first-pour consistency.
#@@# Remote Installation#@#
Remote compressor-to-bath placement supports flexible room layouts, provided the run does not exceed 50 feet between the compressor and bath. Installers must hardwire the bath for electric supply and plan for refrigerant tube and connection labor by a refrigeration contractor.
#@@# Electrical Compatibility#@#
Designed for 208/230v service and NEMA 6-20P plug configuration, the power pack integrates seamlessly with standard commercial electrical systems. Facility managers can verify circuit capacity and breaker protection to match the unit’s load profile.
#@@# Service Materials#@#
The unit uses R-404A refrigerant and ships with clearly specified service requirements to guide maintenance planning.
#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Maintain the Micro Matic MMPP4307-PKG-R glycol power pack by inspecting the compressor oil level monthly and topping per manufacturer guidance. Clean condenser fins with a soft brush and vacuum to preserve 11,500 BTU efficiency. Flush glycol loop semiannually and verify concentration with a refractometer, replacing fluid when contamination exceeds factory limits. Tighten electrical connections and confirm NEMA 6-20P plug integrity. Document service and replace worn seals promptly.
