Stop compromising throughput for temperature control. This glycol-cooled power pack delivers consistent line chilling and robust pumping capacity, enabling continuous draft service across multiple taps while maintaining precise dispense temperatures. Operators gain predictable performance designed for demanding environments where uptime and product integrity are crucial.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug power pack and close beverage valves. Drain glycol into labeled container, then flush lines with clean water until clear. Mix mild detergent with warm water (do not exceed 120°F) and scrub exterior and pump housings with a soft brush. Rinse thoroughly and inspect seals, fittings, and condenser coils; remove debris to maintain cooling efficiency. Refill glycol to manufacturer spec, reconnect power, and check system pressure and pump operation to prevent contamination and fire risk.#@@#Additional Info#@#Micro Matic's MMPP4307-PKG-3-R Pro-Line glycol power pack offers 11,500 BTU cooling with a 1 1/2 HP compressor, R-404A refrigerant, and NEMA 6-20P connection, ideal for remote draft beer systems in commercial settings.#@@#General Info#@#Description #@#
Stop compromising throughput for temperature control. This glycol-cooled power pack delivers consistent line chilling and robust pumping capacity, enabling continuous draft service across multiple taps while maintaining precise dispense temperatures. Operators gain predictable performance designed for demanding environments where uptime and product integrity are crucial.
#@@# Compressor Power#@#
A 1 1/2 HP compressor provides reliable cooling capacity suitable for medium to large draft installations. Engineers designed the unit to manage steady-state loads and rapid recovery cycles, ensuring product quality during peak service periods.
#@@# Glycol Cooling#@#
The system employs glycol cooling to maintain stable line temperatures over extended runs and varied ambient conditions. Operators will experience reduced foam and consistent pour volumes because glycol absorbs heat along the beverage pathway, preventing thermal spikes.
#@@# Triple Pump Assembly#@#
A triple pump and motor assembly supplies redundant flow and adequate head pressure for multiple tap runs and long draught lines. Maintainers will appreciate the modular pump layout, which simplifies service access and minimizes downtime during component replacement.
#@@# Refrigerant Specification#@#
The unit operates with R-404A refrigerant and delivers 11,500 BTU total cooling output to manage thermal loads in busy environments. Technicians can size auxiliary components and line lengths confidently based on the stated capacity and refrigerant type.
#@@# Electrical Interface#@#
Configured for 208/230v operation with a NEMA 6-20P plug, the unit integrates seamlessly with standard commercial electrical infrastructures. Facility managers will find installation straightforward when planning branch circuits and disconnect locations.
#@@# Physical Capacity#@#
The enclosure supports approximately 295 pounds of system mass and features a compact footprint that fits remote installations where space constraints exist.
#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Inspect glycol levels weekly and top off with manufacturer-recommended fluid to maintain 50/50 concentration; record volumes in gallons and liters for audits. Flush lines quarterly and replace filters every six months to prevent microbial growth. Verify electrical connections to the 208/230v NEMA 6-20P plug monthly and torque terminals per Micro Matic specs. Clean condenser fins and check compressor oil at scheduled intervals to sustain 11,500 BTU performance.
