A full-width drip tray and standing pilots reduce cleaning time and ensure continuous ignition reliability in heavy use environments. Certification to CSA and NSF standards confirms compliance with common commercial safety and sanitation requirements.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug and cool the JHP-1060-LP before cleaning. Remove grates and pilot covers; soak in warm, soapy water and scrub with a non-abrasive brush. Lift the plate shelf and pull out the drip tray; empty and degrease with a commercial solvent rated for stainless steel. Wipe burners and stainless surfaces with a mild detergent, rinse, and dry completely. Inspect seals and legs regularly. Clean coils or vents monthly to reduce fire risk and improve efficiency.#@@#Additional Info#@#The Jade JHP-1060-LP 60" stainless steel hotplate delivers 275,000 BTU from ten 27,500 BTU propane burners, has manual controls, a drip tray, a plate shelf, and mounts on 4" adjustable legs. It carries CSA and NSF certifications.#@@#General Info#@#Description #@#
A full-width drip tray and standing pilots reduce cleaning time and ensure continuous ignition reliability in heavy use environments. Certification to CSA and NSF standards confirms compliance with common commercial safety and sanitation requirements.#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Inspect burners weekly and remove debris to maintain stable flame and output. Clean stainless steel surfaces with a neutral detergent and soft cloth; rinse and dry to prevent spotting. Empty and wash the drip tray after each shift to avoid grease accumulation. Verify standing pilots light consistently; adjust or replace faulty thermocouples immediately. Level the unit using the adjustable 4" legs and torque mounting fasteners per CSA guidelines.
