Overall dimensions measure 132 inches wide by 18 inches deep by 27.5 inches high, with a shipped mass of 212 pounds for planning transport and floor loading. Planners can calculate pathway and cart requirements from precise width, depth, and height values.
LongDescription#@#NA#@@#Cleaning Instructions#@#Wipe tempered glass panels with a mild detergent and soft cloth; rinse and dry to prevent streaks. Clean stainless posts and frames with a nonabrasive cleaner; avoid steel wool. Sanitize high-touch zones (edges, ends, serving lips) with an EPA-registered disinfectant per label dwell time. Inspect seals and fasteners weekly; tighten hardware and remove food debris under bases to deter pests. Regular cleaning prevents contamination, preserves appearance, and supports health-code compliance.#@@#Additional Info#@#Hatco's EP6-132 Flav-R-Shield is a 132" W x 18" D x 27.5" H sneeze guard with 1/4" heat-tempered glass, stainless steel posts, NSF certification, and weighs 212 pounds; it supports full-service food lines and installs without permanent fixtures.#@@#General Info#@#Description #@#
Overall dimensions measure 132 inches wide by 18 inches deep by 27.5 inches high, with a shipped mass of 212 pounds for planning transport and floor loading. Planners can calculate pathway and cart requirements from precise width, depth, and height values.#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Inspect the EP6-132 food shield daily for glass chips, loose fasteners, and post alignment for stable operation. Clean tempered glass with a pH-neutral cleaner and lint-free cloth; apply cleaner to the cloth, not directly to the glass. Disassemble removable posts quarterly and flush threaded holes to remove debris, then torque connections to specifications. Sanitize surfaces with an approved sanitizer at recommended times.
