For even cooking, trust only the Montague 136-9A Legend Heavy-Duty Gas Range!
The Montague 136-9A Legend Heavy-Duty Gas Range is a gas-fired unit with 36 inches high, 36 inches deep, and 37-1/4 inches deep overall dimensions. Offering even cooking, it features a standard oven base with a front-venting design. It also has a 40,000 BTU per hour cast iron burner, which uses automatic ignition safety pilot. Additionally, it has thermostat mounted in an insulated cool zone that can adjust temperature from low to 500 degrees Fahrenheit. Spacious and productive, it has a cooking compartment with dimensions of 26-5/8 inches wide, 28 inches deep, and 15 inches high. Meanwhile, it has the capacity to accept 18 inches x 26 inches sized pans sideways or lengthwise.
Intended to provide flexible accommodation, the gas range standard oven also has a three-position adjustable nickel-plated rack supports with one rack standard. Moreover, it features a heavy-duty counterweighted oven door with no springs. The interior panels and the door are porcelain lined as well for long life and easy cleaning.
The Montague 136-9A Legend Heavy-Duty Gas Range is designed with two (2) 18-inch wide by 31-inch deep French-style hot tops made of cast iron precision-ground plates. It comes with front-fired, banjo-type 35,000 BTU per hour burners and front-positioned removable ring and cover. For better heat transfer, it has heat transfer studs cast in plate bottoms. It also features 2 inches side and front flanges, which isolate heat under plates. Additionally, it has an insulating partition between top sections, and sloped, brick-lined flues. For easy cleaning, it is supplied with a drip pan positioned under the burners.
For a sturdy and elegant built, the Montague 136-9A Legend Heavy-Duty Gas Range is constructed with a satin finish, stainless-steel front and exterior bottom with deep front rail. Meanwhile, other surfaces including the sides and the back are painted black with electrolytic zinc undercoating. It also includes a stainless-steel 4-inch rear flue riser and a 6-inch adjustable stainless-steel legs. It has a 1-1/4-inch NPT front gas manifold with 1/2 union on each end. It has a weight of 716 pounds.
LongDescription#@#NA#@@#Cleaning Instructions#@#The Montague 136-9A Legend Heavy-Duty Gas Range should be given a periodic general cleaning. Allow it to cool down before proceeding with cleaning. Once cool, wash the exterior surfaces using a soft cloth or sponge moistened with mild detergent or soap solution. Then, dry thoroughly with a clean cloth. To remove grease and food splatter that have baked on the equipment, use cleanser instead. Apply cleanser to a damp cloth or sponge, and rub gently on the surfaces of the stain. For best results, wipe in the direction of the polishing lines on the metal.
Soft cloth or sponge with detergent or soap solution should also be strong enough to clean the oven interior. Wash away spillovers as soon as possible to prevent carbonizing and a burnt-on condition. However, if hard stains do occur, a mild abrasive nylon cleaning pad may be used to rub it. All flue ways, air passages and openings, burner ports, primary air opening, and more parts should also be periodically cleaned to prevent clogging. Kindly refer to the manufacturer’s manual for more detailed instructions.#@@#Additional Info#@#The Montague 136-9A Legend Heavy-Duty Gas Range meets the industry standards and holds the following approvals: NSF listed, ETL design certified, and CE approved.#@@#General Info#@#For even cooking, trust only the Montague 136-9A Legend Heavy-Duty Gas Range!
The Montague 136-9A Legend Heavy-Duty Gas Range is a gas-fired unit with 36 inches high, 36 inches deep, and 37-1/4 inches deep overall dimensions. Offering even cooking, it features a standard oven base with a front-venting design. It also has a 40,000 BTU per hour cast iron burner, which uses automatic ignition safety pilot. Additionally, it has thermostat mounted in an insulated cool zone that can adjust temperature from low to 500 degrees Fahrenheit. Spacious and productive, it has a cooking compartment with dimensions of 26-5/8 inches wide, 28 inches deep, and 15 inches high. Meanwhile, it has the capacity to accept 18 inches x 26 inches sized pans sideways or lengthwise.
Intended to provide flexible accommodation, the gas range standard oven also has a three-position adjustable nickel-plated rack supports with one rack standard. Moreover, it features a heavy-duty counterweighted oven door with no springs. The interior panels and the door are porcelain lined as well for long life and easy cleaning.
The Montague 136-9A Legend Heavy-Duty Gas Range is designed with two (2) 18-inch wide by 31-inch deep French-style hot tops made of cast iron precision-ground plates. It comes with front-fired, banjo-type 35,000 BTU per hour burners and front-positioned removable ring and cover. For better heat transfer, it has heat transfer studs cast in plate bottoms. It also features 2 inches side and front flanges, which isolate heat under plates. Additionally, it has an insulating partition between top sections, and sloped, brick-lined flues. For easy cleaning, it is supplied with a drip pan positioned under the burners.
For a sturdy and elegant built, the Montague 136-9A Legend Heavy-Duty Gas Range is constructed with a satin finish, stainless-steel front and exterior bottom with deep front rail. Meanwhile, other surfaces including the sides and the back are painted black with electrolytic zinc undercoating. It also includes a stainless-steel 4-inch rear flue riser and a 6-inch adjustable stainless-steel legs. It has a 1-1/4-inch NPT front gas manifold with 1/2 union on each end. It has a weight of 716 pounds.#@@#Delivery Details#@#• Upon receiving your Montague 136-9A Legend Heavy-Duty Gas Range, carefully inspect it for shipping damages. If any damages are found, immediately make a claim about it with the freight carrier and have the product marked as “damaged” on their copy of the freight bill.
• Lift and transport the unit to its location with two or more persons. Use a lift gate if a loading dock is not available.
• Place the gas range in a location with adequate ventilation system. Also, provide minimum clearances of 2 inches from the back wall and 6 inches on the left and right sides of the equipment.#@@#deliverynotes#@#The Montague 136-9A Legend Heavy-Duty Gas Range is usually shipped within # business days after receiving cleared payment.#@@#Maintenance Guide#@#Following proper maintenance procedures are important in keeping the Montague 136-9A Legend Heavy-Duty Gas Range working in its best condition for a long time. If service is needed, kindly contact a local service company or dealer to perform mechanical maintenance and repairs.
