Stop compromising output for uptime. This water-cooled draft power pack delivers sustained cooling capacity and continuous recirculation for high-volume dispensing lines, engineered to maintain consistent glycol temperatures under heavy load. Operators will appreciate the compact footprint and serviceable components that integrate with standard draft systems while minimizing floor space.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug and lock out power before service. Drain glycol and dispose per local codes. Remove cover and clean condenser fins with a soft brush and low-pressure air. Flush pump housings and replace filters on schedule. Wipe exterior with non-abrasive detergent and soft cloth. Sanitize beer lines using approved cleaner, rinse to neutral pH, then circulate sanitizer per CSA or manufacturer guidelines. Verify seals and tighten fittings. Restore power after unit is dry and tested.#@@#Additional Info#@#Micro Matic’s Pro-Line power pack MMPP4305-PKG-WC features a 1 HP compressor, 7,250 BTU cooling, R-134a refrigerant, two 80 gph pumps, and an 11.5 gallon glycol bath. It has a digital thermostat, insulated cover, and cETLus certification.#@@#General Info#@#Description #@#
Stop compromising output for uptime. This water-cooled draft power pack delivers sustained cooling capacity and continuous recirculation for high-volume dispensing lines, engineered to maintain consistent glycol temperatures under heavy load. Operators will appreciate the compact footprint and serviceable components that integrate with standard draft systems while minimizing floor space.
#@@# Circulation Pumps#@#
Two 80 gph vane circulating pumps provide redundant flow and balanced glycol movement to multiple taps. This dual-pump arrangement reduces pressure on each unit and supports sustained throughput during peak service times.
#@@# Glycol Reservoir#@#
The 11.5-gallon glycol bath holds sufficient coolant to stabilize temperatures across long runs of beverage lines. Users monitor fluid levels via the exterior sight glass and maintain composition easily to protect product quality.
#@@# Temperature Control#@#
A digital thermostat enables precise setpoint management to reduce product temperature variance. Technicians program and verify temperatures quickly to meet serving standards and maintain consistent draw characteristics.
#@@# Compressor Power#@#
A 1 HP compressor rated at 7,250 BTU provides effective heat rejection for continuous operation. The unit runs on 208/230v 60 Hz single-phase power and draws 9.5 amps, matching common commercial electrical service.
#@@# Refrigerant System#@#
The system uses R-134a refrigerant with a water-cooled condenser to enhance energy transfer and lower ambient heat load. Facilities with existing water hookups will reduce mechanical room heat and improve utility routing.
#@@# Cabinet Construction#@#
Insulated cabinet with cover and serviceable access supports thermal stability and routine maintenance. The compact footprint measures 37.13 inches wide by 18.75 inches deep by 31.5 inches high and ships at 215 pounds for straightforward installation.
#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Inspect condenser and pump connections weekly to prevent scale and ensure 80 gph vane pumps maintain flow. Drain and replace the 11.5 gallons glycol bath per manufacturer intervals; verify fluid concentration and check the sight glass for level consistency. Clean the exterior cabinet and insulated cover with neutral detergent; avoid abrasives. Confirm 3/8" female NPT fittings, electrical connections, and NEMA 6-20P plug are tight. Record runtime hours and schedule compressor service regularly.
