Stop sacrificing draft temperature control for simplicity. This glycol-cooled power pack combines a 1 HP compressor with a dual pump and motor configuration to maintain consistent line cooling for remote draft systems, enabling stable pour quality across long runs. Food service operators and bar managers will find the unit engineered for continuous duty in commercial environments while meeting common installation requirements.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug the power pack and lock out the circuit before you start. Drain glycol and collect in approved containers. Wipe external surfaces with a mild detergent and soft cloth. Flush lines with manufacturer-approved solution, then refill with correct glycol concentration. Inspect coils and clean fins with soft brush; clear debris from condenser area. Check electrical connections and seals; tighten or replace worn gaskets. Record maintenance date and findings for CSA and safety audits.#@@#Additional Info#@#Micro Matic’s MMPP4305-PKG-R Pro-Line glycol power pack offers 1 HP cooling with R-134a refrigerant, 7,250 BTU capacity, NEMA 6-20P connection, and dual pump design; install compressor within 50 feet of bath and hardwire per code.#@@#General Info#@#Description #@#
Stop sacrificing draft temperature control for simplicity. This glycol-cooled power pack combines a 1 HP compressor with a dual pump and motor configuration to maintain consistent line cooling for remote draft systems, enabling stable pour quality across long runs. Food service operators and bar managers will find the unit engineered for continuous duty in commercial environments while meeting common installation requirements.
#@@# Glycol Cooled#@#
Designed to circulate glycol through remote beer lines, the system provides precise temperature regulation that preserves carbonation and flavor. Operators control line temperatures at the source, reducing waste from off-spec pours and maintaining product consistency during peak service.
#@@# 1 HP Compressor#@#
The compressor delivers 7,250 BTU of cooling capacity, supporting moderate to large tap counts without frequent cycling. Installers will appreciate the specification clarity when sizing systems for bars, stadium concessions, or hospitality outlets.
#@@# Dual Pump Motor#@#
The dual pump and motor arrangement ensures redundancy and stable flow rates under load, minimizing service interruptions during high-demand periods. Technicians can perform routine maintenance with minimal downtime because the system sustains line pressure and circulation.
#@@# Remote Installation#@#
Remote compressor placement must sit within 50 feet of the glycol bath, allowing flexible equipment room layouts and noise isolation on the floor. The electric feed requires hardwiring to the glycol bath, so facilities should plan electrical routing accordingly.
#@@# R-134a Refrigerant#@#
The unit uses R-134a refrigerant and a standard NEMA 6-20P electrical connection for compatibility with existing refrigeration infrastructure. Service teams will find familiar refrigerant handling procedures and readily available parts for maintenance.
#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Service personnel should inspect the Micro Matic MMPP4305-PKG-R glycol power pack weekly to verify pump operation, motor amp draw, and tight electrical connections at the NEMA 6-20P plug. Flush glycol bath quarterly and replace with manufacturer-recommended mixture; record gallons or liters added. Clean condenser fins and ensure ambient ventilation. Check refrigerant lines for R-134a leaks and confirm compressor oil level annually. Replace worn seals and tighten fittings promptly.
