The cold plate delivers targeted temperature control for draft systems while preserving counter and tower real estate, enabling consistent dispense temperatures across multiple lines. Operators achieve predictable hold times and simplified routing with a compact design built for commercial environments.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug beer lines and remove fittings. Wipe the Micro Matic CP-0814-4 cold plate with mild detergent and a soft cloth, rinsing with clean water. Flush 1/4" stainless steel tubing with sanitizer and drain. Clean drip trays and tower surfaces to remove grease. Inspect seals and connections for wear; tighten or replace as needed. Schedule routine coil and plate cleaning to prevent bacteria, fires, higher bills, equipment failure, and failed CSA inspections.#@@#Additional Info#@#Micro Matic CP-0814-4 cold plate measures 8" x 14" and serves four product lines with 1/4" x 12 ft stainless steel tubing; it stabilizes beverage temperature and simplifies installation, meeting professional service demands since 1998.#@@#General Info#@#Description #@#
The cold plate delivers targeted temperature control for draft systems while preserving counter and tower real estate, enabling consistent dispense temperatures across multiple lines. Operators achieve predictable hold times and simplified routing with a compact design built for commercial environments.
The unit integrates four product channels formed from stainless steel tubing to support simultaneous cooling of multiple lines. Installers can route each run independently to balance line lengths and minimize pressure variation during service.
The dimensions concentrate thermal mass in a shallow profile, reducing required cabinet space while preserving contact area for tubing. Technicians benefit from straightforward mounting and access in tight underbar or tower cavities.
Fabrication uses stainless steel tubing and plate interfaces to resist corrosion from condensate and cleaning agents. Maintenance crews can reduce replacement frequency because the metal resists pitting and deformation under repeated thermal cycles.
Designed for four product lines, the plate supports parallel service for small to medium draft installations without complex manifold work. Operators can maintain consistent flow rates when matching tube diameter and keg pressures properly.
Close coupling between tubing and plate maximizes conductive heat removal to maintain liquid temperatures within target bands. Cooling systems achieve stable dispense temperatures more quickly compared with remotely routed coils.
The simple assembly permits rapid access for inspection, line swaps, and leak checks during scheduled maintenance. Service technicians can perform routine work without specialized tools, lowering downtime and labor costs.
#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Maintain the Micro Matic CP-0814-4 8" x 14" cold plate by flushing lines with approved brewery sanitizer after each service period; circulate sanitizer through the 1/4" stainless steel tubing to prevent biofilm. Inspect welds and fittings weekly for leaks and tighten clamps with a torque wrench to manufacturer specs. Descale with citric solution quarterly, rinse thoroughly, and document maintenance dates for CSA compliance and inventory control.
