Serve with confidence using a robust full-service pass-over food shield designed for high-traffic foodservice outlets. This single-sided Flav-R-Shield provides clear sightlines while protecting food from contamination, and it installs seamlessly on countertops to integrate with existing service lines. Professionals will appreciate the sturdy construction and compliance features that support continuous operation in institutional kitchens.
LongDescription#@#NA#@@#Cleaning Instructions#@#Wipe tempered glass and stainless posts with a mild detergent solution and soft cloth; rinse with clean water and dry to prevent streaks. Sanitize high-touch zones (menu covers, railings, booth edges) after peak service using an EPA-registered sanitizer per label dwell time. Inspect seals and mounting hardware weekly; tighten fasteners and remove food debris under shelves to deter pests. Regular cleaning prevents contamination of food and hands and supports health-code compliance.#@@#Additional Info#@#Hatco's EP12-10815 Flav-R-Shield is a 108" W, 17.25" H, 15" D food shield with 1/4" heat-tempered glass, polished edges, and stainless steel posts. It weighs 92 pounds and is NSF certified, made in the USA.#@@#General Info#@#Description #@#
Serve with confidence using a robust full-service pass-over food shield designed for high-traffic foodservice outlets. This single-sided Flav-R-Shield provides clear sightlines while protecting food from contamination, and it installs seamlessly on countertops to integrate with existing service lines. Professionals will appreciate the sturdy construction and compliance features that support continuous operation in institutional kitchens.
#@@# Glass Construction#@#
Tempered glass stands 1/4 inch thick across the top shelf, front, and side panels to resist impact and thermal stress while maintaining optical clarity. The design includes 3/4 inch radius corners and polished edges to reduce cleaning time and minimize contamination points.
#@@# Stainless Frame#@#
Brushed 304 stainless steel posts with a 1-inch outside diameter deliver structural support and corrosion resistance in humid or wet environments. Fabrication meets NSF component requirements and supports frequent sanitation cycles typical of schools and hospitals.
#@@# Full Service Design#@#
The single-face full-service configuration allows staff to serve from behind the shield without compromising protection or service speed. Countertop installation provides a compact footprint at 108 inches wide by 15 inches deep, aligning with standard service counters.
#@@# Made In USA#@#
Manufacturing occurs domestically to support quality control and consistent material sourcing for long production runs. Facility oversight ensures repeatable tolerances for glass thickness, post dimensions, and weld integrity.
#@@# Size Compatibility#@#
Overall dimensions measure 108 inches wide, 17.25 inches high, and 15 inches deep, fitting service lines that require a long continuous shield and generous pass-over clearance. The weight of approximately 92 pounds balances durability with manageable handling during installation.
#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Clean glass with a nonabrasive cloth and a mild detergent solution after each service to remove food soils and fingerprints. Rinse with clear water and dry to prevent spotting. Inspect 1″ OD brushed 304 stainless steel posts and mounting hardware weekly; tighten fasteners and correct alignment. Check 1/4″ heat-tempered glass for chips and replace damaged panels immediately. Sanitize surfaces per CSA or facility protocol and document each maintenance action.
