Original text:
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug nearby appliances and clear the tabletop. Use mild detergent and warm water to scrub the stainless steel top with a soft cloth; rinse and dry to prevent spotting. Remove debris from the backsplash and undershelf; clean undershelf and legs with non-abrasive cleaner to avoid corrosion. Degrease vents and oven exteriors to reduce fire risk. Inspect seals and fasteners; tighten or replace as needed. Maintain a weekly schedule for safety, efficiency, and CSA compliance.#@@#Additional Info#@#BK Resources VTTR-1896 work table measures 96" W x 18" D. It has an 18/430 stainless steel top, rounded edges, a 1-1/2" backsplash, reinforced channels, a galvanized undershelf, and six adjustable galvanized legs. NSF certified, it weighs 97 pounds.#@@#General Info#@#Description #@#
Original text:
#@@# Top Surface.#@#
The 18/430 stainless steel top provides corrosion resistance and an even work plane for cutting, plating, and assembly tasks. Rounded turndown edges on the front and sides prevent product spillage and simplify wipe-down cleaning routines.
#@@# Backsplash Riser.#@#
A 1-1/2" rear riser controls run-off and protects walls from splashes during high-volume prep. The upturned backsplash channels liquids back onto the top, reducing floor cleanups and preserving wall finishes.
#@@# Reinforced Structure.#@#
Reinforcement channels beneath the top increase rigidity across the full 96" span and prevent sag under heavy loads. The solid construction supports pans, equipment, and stacked containers without compromising the work plane.
#@@# Galvanized Undershelf.#@#
An adjustable galvanized undershelf provides organized storage for bulk ingredients and small equipment while resisting rust in humid environments. Technicians can set shelf height to accommodate totes and sheet pans, improving flow and accessibility.
#@@# Leg Assembly.#@#
Six 1-5/8" diameter galvanized legs offer stable support and distribute weight evenly across the footprint. Adjustable high-impact, corrosion-resistant feet allow precise leveling on uneven floors and reduce wear at contact points.
#@@# Compliance And Serviceability.#@#
This table holds NSF certification and uses common construction materials for straightforward maintenance and sanitation. Field technicians appreciate the straightforward assembly and replaceable components for long service life.
#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Maintain the BK Resources VTTR-1896 work table by cleaning the 18/430 stainless steel top daily with a neutral pH detergent and soft cloth to prevent corrosion. Sanitize after food contact using NSF-approved sanitizer. Inspect and tighten galvanized leg fasteners weekly; replace high-impact feet showing wear. Remove and degrease the adjustable undershelf monthly to avoid accumulation. Verify the 1-1/2" backsplash seal and address gaps immediately to prevent moisture intrusion.
