A 72 inch width and 36 inch depth deliver an expansive work area suitable for multi-station prep, plating, or assembly operations. The generous surface area supports bulk tasks measured in gallons and liters, enabling efficient throughput during peak service.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug appliance and clear the surface. Use a mild detergent solution and a soft cloth to clean the 430 stainless steel top, wiping with the grain to avoid scratches. Scrub edges and 1-1/2" backsplash with a non-abrasive pad. Rinse with clean water and dry thoroughly to prevent corrosion. Clean galvanized legs and crossrails with a neutral pH cleaner. Inspect seals and bullet feet; tighten or replace as needed. Perform coil and vent cleaning regularly to reduce fire risk and save energy.#@@#Additional Info#@#Advance Tabco TFAG-366 work table is 72" wide and 36" deep with a 16 gauge Type 430 stainless steel top, 1-1/2" rear up-turn, galvanized legs, adjustable plastic feet, rounded edge, NSF certified, 103 pounds.#@@#General Info#@#Description #@#
A 72 inch width and 36 inch depth deliver an expansive work area suitable for multi-station prep, plating, or assembly operations. The generous surface area supports bulk tasks measured in gallons and liters, enabling efficient throughput during peak service.#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Maintain the Advance Tabco TFAG-366 work table by cleaning the 16 gauge Type 430 stainless steel top daily with a pH-neutral detergent and warm water, then rinse and dry to prevent spotting. Inspect the 1-1/2" rear up-turn and rounded edge weekly for debris; remove buildup with a soft brush. Lubricate adjustable plastic feet quarterly and ensure the table is level to prevent stress on legs and crossrails. Check welds and fasteners monthly and tighten if loose.
