The combination of a thick wood top and stainless base yields a balance of durability and repairability in heavy use environments. Facilities will obtain a robust work surface that tolerates daily wear while allowing periodic refinishing to extend usable life.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug equipment and clear the wood top. Mix mild soap with warm water (use gallons or liters as needed). Wipe the 1 3/4" thick wood surface with a soft cloth; avoid saturating the wood. Clean stainless steel legs and cross rails with non-abrasive cleaner, then rinse and dry. Remove grease from splash and vents to prevent fires. Inspect seals and hardware; tighten adjustable hex foot. Regular cleaning prevents contamination, reduces breakdowns, lowers energy use, and helps pass CSA inspections.#@@#Additional Info#@#Advance Tabco’s TBS-368 bakers top work table is 96" wide by 36" deep, with a 1 3/4" wood top, 4" rear and side splash, stainless steel legs, adjustable hex feet, NSF certified, weighs 240 pounds.#@@#General Info#@#Description #@#
The combination of a thick wood top and stainless base yields a balance of durability and repairability in heavy use environments. Facilities will obtain a robust work surface that tolerates daily wear while allowing periodic refinishing to extend usable life.#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Inspect wood top daily for food debris and oil; remove residues with a soft cloth and a food-safe wood cleaner to prevent staining and bacterial buildup. Rotate work area to distribute wear and sand lightly with fine-grit paper every six months, then apply a sanctioned mineral oil or food-grade finish to seal grain and maintain durability. Tighten stainless steel leg fasteners monthly and verify adjustable hex feet remain level. Follow CSA and NSF guidelines for sanitary surfaces.
