A robust build yields a reported unit weight near 135 pounds, signaling solid construction and resistance to workplace impacts. Facility planners account for this mass during installation and anchoring to ensure long-term stability.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug equipment and clear the work surface. Use a mild detergent solution and a soft cloth to scrub the 14 gauge 304 stainless steel top and 1-1/2" backsplash. Rinse with clean water and dry with a lint-free towel to prevent spotting. Clean legs and adjustable hex feet, removing debris from under the open front cabinet. Degrease ovens and vents regularly to reduce fire risk. Inspect seals and fasteners, tighten as needed. Maintain records to meet CSA and health inspection requirements.#@@#Additional Info#@#Advance Tabco EF-SS-243 work table is 36" W x 24" D with a 1.5" rear upturn and 14 gauge Type 304 stainless steel top. It has an open front cabinet base, stainless steel legs with adjustable feet, is NSF certified, and supports heavy prep loads.#@@#General Info#@#Description #@#
A robust build yields a reported unit weight near 135 pounds, signaling solid construction and resistance to workplace impacts. Facility planners account for this mass during installation and anchoring to ensure long-term stability.#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Inspect the table weekly for loose fasteners and verify adjustable hex feet contact to maintain level. Clean the 14 gauge Type 304 stainless surface daily with a pH-neutral detergent and soft cloth; rinse and dry to prevent spotting. Disinfect according to facility protocol using EPA-approved agents compatible with stainless steel. Remove debris from the 1-1/2" backsplash and open front cabinet base; vacuum or wipe corners. Lubricate hinge points if applicable and replace damaged seals promptly.
