At 59 inches long with a 2 inch return and a 44 inch height, the unit fits in constrained layouts while maximizing usable surface area. Designers will integrate the table into island or corner plans without sacrificing clearance or ergonomics.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug equipment and remove all debris. Scrub the 16 Gauge Type 304 stainless top and 10" H backsplash with mild detergent and warm water. Rinse thoroughly and dry to prevent corrosion. Degrease legs, crossrails, and return; remove trapped food to prevent bacterial growth and fire risk. Inspect seals and fasteners, tighten as needed. Clean weekly or after heavy use to maintain efficiency, extend equipment life, and ensure CSA-compliant sanitation.#@@#Additional Info#@#Advance Tabco DTC-G70-60L is a 59" L-shaped dishtable made from 16 gauge Type 304 stainless steel. It features a 10-1/2" backsplash, stainless steel legs, NSFCertified design, weighs 205 pounds, and has a 44" height.#@@#General Info#@#Description #@#
At 59 inches long with a 2 inch return and a 44 inch height, the unit fits in constrained layouts while maximizing usable surface area. Designers will integrate the table into island or corner plans without sacrificing clearance or ergonomics.#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Inspect welds and fasteners on the Advance Tabco DTC-G70-60L dishtable weekly to detect corrosion or loosening. Clean the 16 gauge Type 304 stainless top with neutral detergent and warm water; rinse and dry to prevent spotting. Sanitize surfaces using a food-safe sanitizer following manufacturer dwell times. Verify stainless steel legs and crossrails remain square and tighten leg bolts as needed. Replace gasket or backsplash seal if wear appears to maintain NSF compliance.
