NSF-certified design supports compliance with public health standards common to restaurants, schools, and hospitals. Purchasing managers obtain a code-aware solution that aligns with sanitation inspections and institutional requirements.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug appliance and clear surrounding area. Remove food and debris from sink basins. Scrub compartments with mild detergent and a soft brush, focusing on corners and the 1-1/2 IPS waste drains. Rinse thoroughly with hot water and dry with a clean cloth. Clean backsplash and galvanized legs to remove grease. Inspect seals and drain baskets; replace damaged parts. Repeat weekly or after heavy use to prevent bacteria, fires, higher utility costs, and equipment failure.#@@#Additional Info#@#Advance Tabco 4-42-60 scullery sink has two 30"W x 24"D x 13" deep compartments, 6" splash, 1-1/2 IPS drain baskets, 16 gauge Type 430 stainless steel top, and galvanized leg base with plastic feet. Overall size is 60" L x 27.5" D, weight 108 pounds.#@@#General Info#@#Description #@#
NSF-certified design supports compliance with public health standards common to restaurants, schools, and hospitals. Purchasing managers obtain a code-aware solution that aligns with sanitation inspections and institutional requirements.#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Maintain the Advance Tabco 4-42-60 scullery sink by inspecting welds and seams weekly, repairing gaps immediately. Clean compartments daily with non-abrasive detergent and warm water; rinse to remove residues. Sanitize with approved quaternary ammonium solutions per manufacturer instructions. Flush 1-1/2 IPS waste drains weekly with enzymatic cleaner to prevent clogs. Tighten galvanized legs and replace worn plastic bullet feet to ensure level operation and NSF compliance.
