Stop compromising workspace durability for cost. This industrial work table features a reinforced stainless top, a rigid galvanized base, and NSF certification to support continuous prep operations in high-traffic kitchens and service areas.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug appliances and clear the work surface. Scrub the 18/400 stainless top with mild detergent and warm water using a soft cloth. Rinse and dry to prevent corrosion and bacterial growth. Degrease ovens, hoods, and vents weekly to reduce fire risk. Vacuum condenser coils and wipe refrigeration exteriors monthly to save energy. Inspect galvanized legs, crossrails, and 5" backsplash for damage; tighten fittings and replace worn seals to avoid failures and ensure CSA and NSF compliance.#@@#Additional Info#@#Sapphire Manufacturing SMTO-3096G work table is 96" W x 30" D. It has an 18/400 stainless steel top, rounded edges, flat ends, 5" backsplash, galvanized steel legs, undershelf, adjustable feet, NSF certified, 120 pounds, KD assembly.#@@#General Info#@#Description #@#
Stop compromising workspace durability for cost. This industrial work table features a reinforced stainless top, a rigid galvanized base, and NSF certification to support continuous prep operations in high-traffic kitchens and service areas.
#@@# Top Reinforced Surface#@#
The 18/400 stainless steel reinforced top provides structural rigidity across the full 96 inches, resisting warping under heavy loads. Restaurants and institutions benefit from a stable flat surface that maintains alignment for slicing, assembly, and portioning tasks.
#@@# Flat Edge Profile#@#
A 1-1/2 inch rounded edge on the long sides and a square flat edge on the ends balance operator comfort with clean hygiene. Kitchens gain safer handling along the sides while the flat ends allow flush placement against walls or equipment.
#@@# Galvanized Leg System#@#
Four galvanized steel legs with side and rear bracing create a stable support geometry for intensive daily use. Facilities achieve consistent leveling and reduced vibration when processing heavy containers or machinery on the top.
#@@# Adjustable Feet And KD Design#@#
The table ships knockdown for simplified delivery and features 1 inch adjustable plastic bullet feet for precise leveling on uneven floors. Maintenance crews can install and align the unit quickly and adapt height tolerances to existing line configurations.
#@@# Integrated Backsplash#@#
A 5 inch backsplash mitigates splashes and simplifies cleaning where sinks or wet tasks occur adjacent to the work surface. Food service managers reduce wall staining and streamline sanitation procedures with the integrated protection.
#@@# Open Base With Crossrails#@#
An open base constructed with side and rear crossrails and galvanized undershelf options allows for accessible storage and airflow beneath the table. Operators optimize staging of trays, racks, and small equipment while custodial staff complete rapid floor cleaning.
#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Inspect the Sapphire Manufacturing SMTO-3096G work table weekly for loose fasteners and damaged welds. Tighten bolts to 30–50 in-lbs as needed to ensure structural integrity. Clean the 18/400 stainless steel reinforced top after each shift using a pH-neutral detergent and warm water; rinse thoroughly and dry with a microfiber cloth to avoid spotting. Sanitize surfaces with a food-safe sanitizer according to manufacturer dwell times.
