Built to drive throughput without compromising texture, this heavy-duty electric bench meat grinder delivers consistent grind quality and continuous operation for busy kitchens and processing lines. It operates at 1100 watts and 1.5 HP to power high-yield production through a #32 head while maintaining stable torque at 110 RPM. Operators will find the polished aluminum housing simplifies cleaning and resists corrosion in demanding environments.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug the grinder and lock out power before cleaning. Remove hopper, feed throat, screw, blade and plate; wash parts in warm, soapy water and rinse. Wipe the aluminum body with a soft cloth and mild detergent; avoid abrasives. Sanitize food-contact parts per CSA or local rules, then air dry. Clean vents and exterior daily to prevent grease buildup and fire risk. Inspect seals and sharpen blades regularly to maintain performance and reduce breakdowns.#@@#Additional Info#@#Omcan USA’s Elite Series #32 electric bench grinder offers 1.5 HP (1100 Watts) at 110 volts, 60 Hz, 110 RPM for heavy-duty use; polished aluminum housing, NEMA 5-20P cord, CE and CSA approvals, 80 pounds, made in Italy for commercial kitchens.#@@#General Info#@#Description #@#
Built to drive throughput without compromising texture, this heavy-duty electric bench meat grinder delivers consistent grind quality and continuous operation for busy kitchens and processing lines. It operates at 1100 watts and 1.5 HP to power high-yield production through a #32 head while maintaining stable torque at 110 RPM. Operators will find the polished aluminum housing simplifies cleaning and resists corrosion in demanding environments.
#@@# Heavy Duty Motor#@#
A 1.5 HP motor provides the torque required for continuous grinding of large volumes of product, reducing stall risk during dense cuts. Service teams will appreciate the motor design for predictable duty cycles and lower maintenance frequency.
#@@# Efficient Power Supply#@#
The unit runs on 110 volts, 60 hertz single phase with a NEMA 5-20P cord, enabling straightforward integration into common commercial electrical circuits. Facility managers will find installation predictable and compatible with standard outlets used in small and midsize operations.
#@@# Commercial Sized Head#@#
A #32 attachment hub accepts standard plates and cutters to produce uniform particle size for sausages, patties, and ground mixes. Production supervisors will gain control over texture and yield through interchangeable grinding components.
#@@# Durable Aluminum Housing#@#
Polished aluminum construction resists rust and stands up to daily cleaning protocols while maintaining a low external temperature during operation. Kitchen staff will notice fewer surface contaminant concerns and easier sanitation workflows.
#@@# Optimized Speed#@#
Operating at 110 RPM, the grinder balances throughput and cut consistency to preserve protein structure and minimize heat buildup. Chefs focusing on product quality will see reduced fat smearing and improved final texture.
#@@# Safety And Certification#@#
The machine carries CE marking and local QPS approval, reflecting compliance with applicable standards for safe operation in professional settings.
#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Service teams should inspect gearbox oil and replace it every 3 months or 500 operating hours to prevent wear. Clean the feed throat, hopper, knife block, and plates after each shift using warm water and food‑safe detergent; sanitize with a quaternary ammonium solution per label directions and allow full air dry before reassembly. Tighten mounting bolts and verify NEMA 5-20P cord integrity weekly. Calibrate knife clearance monthly and store unit indoors to avoid corrosion.
