Weighing approximately 15 pounds, the shelf balances strength with manageable handling during installation and reconfiguration. Facilities staff will reposition or replace units without requiring heavy equipment. This combination of features ensures that the shelf is a practical choice for any kitchen setup, enhancing both functionality and aesthetics.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug shelving-area power and remove items. Mix warm water with mild detergent (use gallons or liters as needed). Wipe shelf and brackets with a soft cloth; scrub corners and rear up-turn. Rinse with clean water and dry thoroughly to prevent corrosion. Clean mounting hardware and check fasteners; tighten if loose. Degrease vents and nearby ovens to prevent fires. Regular cleaning removes bacteria, lowers utility use, extends equipment life, and helps pass CSA and health inspections.#@@#Additional Info#@#NBR Equipment WS-1636 is a 36" x 16" x 13" 18-gauge 304 stainless steel wall shelf with satin finish, 1.5" rear up-turn, two 11.5" brackets, and mounting hardware; NSF certified, 15 pounds, for heavy-use foodservice.#@@#General Info#@#Description #@#
Weighing approximately 15 pounds, the shelf balances strength with manageable handling during installation and reconfiguration. Facilities staff will reposition or replace units without requiring heavy equipment. This combination of features ensures that the shelf is a practical choice for any kitchen setup, enhancing both functionality and aesthetics.#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Inspect mounting fasteners monthly and tighten to maintain load capacity and safety. Clean the 18/304 stainless steel surface with mild detergent and warm water, then rinse and dry with a soft cloth to prevent water spots and corrosion. Remove grease with a neutral pH cleaner; avoid chloride-based products. Verify angle support brackets and rear 1-1/2" up-turn remain secure and straight. Lubricate fasteners lightly and replace worn hardware promptly.
