The sink includes 3.5 inch die-stamped drain openings and a single set of splash mount faucet holes with 8 inch centers to accept common faucet assemblies and simplify plumbing. NSF certification verifies compliance with commercial sanitation standards and facilitates regulatory inspections.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug nearby equipment and clear the sink area. Scrub bowls with a mild detergent and a soft brush, paying special attention to corners and 3-1/2" drain openings. Degrease drainboards and backsplash to reduce fire risk. Clean condenser coils on adjacent refrigeration units to save energy. Inspect and wipe legs, gussets, bracing, and adjustable bullet feet. Rinse thoroughly and dry all stainless surfaces to prevent corrosion and ensure CSA and NSF compliance.#@@#Additional Info#@#NBR Equipment’s 2SS-182414LR18 sink measures 75.25" W x 29.5" D x 44.06" H, has two 18" x 24" x 14" bowls, left/right drainboards, and is made of 16-gauge Type 300 stainless steel. It weighs 94 pounds and is NSF certified.#@@#General Info#@#Description #@#
The sink includes 3.5 inch die-stamped drain openings and a single set of splash mount faucet holes with 8 inch centers to accept common faucet assemblies and simplify plumbing. NSF certification verifies compliance with commercial sanitation standards and facilitates regulatory inspections.#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Inspect stainless surfaces daily and remove soils with a pH-neutral detergent and soft cloth to prevent corrosion. Rinse thoroughly and dry to avoid water spots. Clean 3-1/2" drain openings and strainers weekly to maintain flow. Verify faucet mount and splash holes remain sealed and torque fittings quarterly. Tighten stainless legs, gussets and crossrails semiannually and adjust bullet feet for level. Replace worn gaskets and check NSF compliance records annually.
