Outfit a high-volume draft serving operation with a compact, water-cooled power pack designed for continuous circulation and precise temperature control. Built to integrate seamlessly with commercial draft racks, this unit features a robust compressor, dual circulating pumps, and a monitored glycol bath to maintain consistent line temperatures during peak service. Operators will experience stable dispense performance, reduced foaming, and simplified maintenance from a single, enclosed system.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug power and close water supply before cleaning. Remove exterior cover and drain glycol bath, collecting at least 2 gallons in a sealed container. Wipe coils, pumps, compressor housing, and cabinet interior with a soft cloth and mild detergent. Rinse with clean water, avoiding electrical components. Inspect seals and fittings for leaks; tighten or replace as needed. Refill glycol to specified liters, restore power, and verify 208/230v operation and thermostat function.#@@#Additional Info#@#Micro Matic’s MMPP4303-PKG-WC power pack features a 3/4 HP compressor, two 80 gph pumps, an 11.5 gallon glycol bath, digital thermostat, insulated cabinet, 5,100 BTU cooling, R-134a refrigerant, and is cETLus certified.#@@#General Info#@#Description #@#
Outfit a high-volume draft serving operation with a compact, water-cooled power pack designed for continuous circulation and precise temperature control. Built to integrate seamlessly with commercial draft racks, this unit features a robust compressor, dual circulating pumps, and a monitored glycol bath to maintain consistent line temperatures during peak service. Operators will experience stable dispense performance, reduced foaming, and simplified maintenance from a single, enclosed system.
#@@# Compressor Cooling#@#
A 3/4 HP compressor delivers 5,100 BTU of refrigeration capacity, efficiently removing heat from circulating glycol. Technicians install the unit on 208/230v, 60 hertz, single-phase power with NEMA 6-20P service, ensuring reliable cold generation under sustained load.
#@@# Dual Circulation Pumps#@#
Two 80 gph vane pumps, each powered by a 1/3 HP motor, provide redundant flow through draft lines, maintaining even cooling across multiple taps. Managers benefit from minimized temperature differentials between head and keg, which reduces foam loss and enhances pour consistency.
#@@# Insulated Glycol Bath#@#
An 11.5-gallon glycol reservoir with an exterior sight glass holds thermal fluid and provides thermal mass that limits temperature swings during heavy draw. Staff can monitor the fill visually and rely on the insulated cabinet and cover to minimize heat gain from ambient kitchen conditions.
#@@# Digital Thermostat Control#@#
A digital thermostat allows for precise setpoint management to maintain target line temperatures and prevent overcooling or undercooling. Service personnel can easily calibrate the control and use the readout to verify operating conditions during routine checks.
#@@# Water-Cooled Design#@#
A water-cooled heat exchange configuration offloads condenser heat externally, reducing ambient heat buildup in service areas and improving overall system efficiency.
#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Inspect pump seals weekly and replace worn seals to prevent glycol leaks and maintain efficiency. Drain and flush the 11.5-gallon glycol bath quarterly, then refill to the specified concentration and verify the level via the sight glass. Clean condenser and water-cooling lines monthly to prevent scale and biofilm; use compatible descaler and follow local protocols. Calibrate the digital thermostat semiannually and document settings.
