Two dedicated glycol lines enable separate cooling circuits or redundancy for temperature-critical installations. Engineers design systems with backup cooling or segmented control to maintain consistent temperatures during peak service.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug lines and depressurize the trunk before cleaning. Drain beverage and glycol lines completely. Flush tubing with warm water, then circulate a manufacturer-approved cleaner at recommended concentration for 15–30 minutes. Rinse until clear, then sanitize with a food-contact sanitizer per CSA or local protocol. Wipe exterior aluminum wrap with non-abrasive cleaner. Inspect seals and fittings; replace damaged parts. Document cleaning date, cleaner used, and technician initials.#@@#Additional Info#@#Micro Matic CDI852-BF BarrierMaster Flavorlock trunk line offers 5/16" I.D. color-coded tubing with 0.31" inside diameter for eight-product distribution and two glycol lines, wrapped in aluminum foil for cold transfer; NSF certified for bar use.#@@#General Info#@#Description #@#
Two dedicated glycol lines enable separate cooling circuits or redundancy for temperature-critical installations. Engineers design systems with backup cooling or segmented control to maintain consistent temperatures during peak service.#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Service personnel should flush the Micro Matic CDI852-BF trunk line with warm water and approved food-grade cleaner after each keg change to prevent flavor transfer and biofilm. Inspect color-coded tubing and glycol lines weekly for cracks or discoloration and replace damaged sections immediately. Ensure aluminum foil cold transfer wrap remains intact and reseal seams to maintain thermal efficiency. Calibrate fittings monthly and document maintenance per CSA guidelines.
