Designers used removable components that enable straightforward cleaning and maintenance, and the 182 pounds unit mass balances sturdiness with manageable handling during installation. Technicians access the open base to reach utilities or reposition the unit with minimal disruption.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug nearby equipment. Remove all items from the 84" x 30" stainless steel top. Use a mild detergent and warm water with a soft cloth to clean the surface; rinse with clean water. Scrub galvanized undershelf and posts with a non-abrasive brush and neutral cleaner to remove grease. Sanitize food-contact areas with an approved sanitizer per CSA guidelines. Dry thoroughly before use. Clean weekly or more often to prevent contamination, fires, higher energy use, and equipment wear.#@@#Additional Info#@#Duke’s 314-3684 stainless work table measures 84" x 30" with a 36" high Type 300 stainless top, flat edge, open galvanized base, and undershelf. NSF certified, 182 pounds; ideal for heavy-duty foodservice use.#@@#General Info#@#Description #@#
Designers used removable components that enable straightforward cleaning and maintenance, and the 182 pounds unit mass balances sturdiness with manageable handling during installation. Technicians access the open base to reach utilities or reposition the unit with minimal disruption.#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Inspect the Duke 314-3684 work table weekly and tighten all fasteners to maintain structural integrity. Clean the 300 series stainless steel top with a neutral pH detergent and warm water; rinse and dry to prevent spotting. Remove debris from the galvanized undershelf and treat rust by sanding and applying a zinc-rich primer. Verify level and adjust legs to keep a flat work surface. Replace seals and damaged components immediately to sustain NSF compliance.
