Ninety six inches of workspace and a 30 inch depth provide broad staging area for prep, plating or holding equipment while meeting NSF sanitary criteria. Facilities managers will value the combination of heavy duty construction and regulatory compliance for institutional and commercial environments.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug equipment before cleaning. Remove contents and debris. Use a mild detergent in warm water; scrub 304 stainless surfaces with a soft cloth and non-abrasive pad. Rinse thoroughly and dry to prevent corrosion and water spots. Clean condenser coils and vents with a brush; inspect and clear grease from ovens and hoods to reduce fire risk. Check seals and hardware; tighten or replace as needed. Document cleaning frequency to meet CSA and inspection standards.#@@#Additional Info#@#Advance Tabco SDRC-308 has a 96" W x 30" D 14-gauge Type 304 stainless steel top with a 5" backsplash, rounded edge, three NSF drawers, and an enclosed base with four sliding doors; it supports a 515-pound unit for commercial kitchens.#@@#General Info#@#Description #@#
Ninety six inches of workspace and a 30 inch depth provide broad staging area for prep, plating or holding equipment while meeting NSF sanitary criteria. Facilities managers will value the combination of heavy duty construction and regulatory compliance for institutional and commercial environments.#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Inspect seals and sliding door tracks weekly to prevent debris buildup and ensure smooth operation. Remove shelves and wash with mild detergent; rinse and dry before reinsertion to prevent corrosion. Clean 304 stainless surfaces with a nonabrasive stainless cleaner and soft cloth, following grain to avoid scratches. Verify adjustable hex feet are level and torque fasteners as needed. Schedule condenser and ventilation checks per CSA or local code to sustain performance.
