Stainless steel bullet feet allow for washdown cleaning and floor access beneath the unit for utility connections and mop-out procedures. The unit weighs 265 pounds, enabling installers to plan for handling and anchoring during setup.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug the dish machine and pull the unit clear. Remove debris from the 3 bowls and drainboard. Scrub bowls with a mild detergent and a soft brush, rinse with clean water, and sanitize per CSA or local rules. Clean the 59" right drainboard and 10-1/2" backsplash; dry thoroughly. Wipe the 16 gauge 304 stainless steel top, legs, crossrails, and bullet feet with a non-abrasive cleaner. Inspect seals and drains; clear clogs. Repeat weekly and after heavy use.#@@#Additional Info#@#Advance Tabco DTC-3-1620-120R dishtable features a 3-compartment sink with three 16" x 20" x 14" bowls, a 59" drainboard, and is made of 16 gauge Type 304 stainless steel. It is NSF certified and weighs 265 pounds.#@@#General Info#@#Description #@#
Stainless steel bullet feet allow for washdown cleaning and floor access beneath the unit for utility connections and mop-out procedures. The unit weighs 265 pounds, enabling installers to plan for handling and anchoring during setup.#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Inspect welds and seals monthly on the Advance Tabco DTC-3-1620-120R to prevent leaks and contamination. Remove and sanitize each 16" x 20" x 14" bowl after service with a food-safe detergent; rinse and air-dry. Flush the 59" right drainboard and trap weekly to avoid clogs. Clean 16 Gauge 304 stainless surfaces with nonabrasive cleaner and microfiber cloth; polish along grain. Verify leg bracing and bullet feet torque quarterly to maintain alignment and NSF compliance.
