For high-volume facilities needing precise temperature control and robust storage, this all-refrigerator/all-freezer combination ensures consistent, service-ready performance. Designed for clinical, culinary, and institutional settings, it offers a 9.88 Cu. Ft. capacity with stainless-steel interiors and exterior panels for rigorous daily use. Engineers prioritize this configuration for reliable preservation, rapid recovery, and sanitary construction.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug unit and remove contents. Wash stainless interior with mild soap and warm water; rinse and dry. Clean condenser coils on the bottom every 3 months to maintain efficiency. Defrost fully if frost exceeds 1/4 inch. Use non‑abrasive cleaners on the stainless exterior. Inspect and clean door gaskets; replace if cracked. Reconnect power only when interior is dry. Regular cleaning prevents contamination, fire risk, higher energy use, equipment failure, and inspection failures.#@@#Additional Info#@#Summit ARS6PV-AFZ5PVBIADASTACK offers 9.88 Cu. Ft. capacity, stainless steel design, two solid doors, bottom-mounted R-600a refrigeration, and 115V/60Hz operation for medical-grade use in hospitals, universities, and food services.#@@#General Info#@#Description #@#
For high-volume facilities needing precise temperature control and robust storage, this all-refrigerator/all-freezer combination ensures consistent, service-ready performance. Designed for clinical, culinary, and institutional settings, it offers a 9.88 Cu. Ft. capacity with stainless-steel interiors and exterior panels for rigorous daily use. Engineers prioritize this configuration for reliable preservation, rapid recovery, and sanitary construction.
#@@# Dual Compartment Layout#@#
Two independently sealed compartments enable simultaneous refrigeration and freezing or segregated storage of temperature-sensitive materials. Independently controlled sections maximize volume and reduce cross-contamination during frequent door cycles.
#@@# Capacity Distribution#@#
The 9.88 Cu. Ft. capacity meets inventory needs for labs, cafeterias, and ward kitchens without expanding the footprint. Operators can store bulk packs and trays while maintaining ergonomic access within a 23.38-inch width and 64-inch height.
#@@# Controlled Refrigeration#@#
Using R-600a refrigerant and a bottom-mounted compressor, the system optimizes thermal recovery and reduces noise. Facilities benefit from faster pull-down times and steady control across both compartments at 115 volts and 60 hertz.
#@@# Sanitary Construction#@#
Stainless-steel finishes resist corrosion and simplify sanitation protocols for hospitals, universities, and CSA-inspected kitchens. Full-hinged doors eliminate glass breakage risk and maintain gasket integrity for controlled environments.
#@@# Serviceability Features#@#
Technicians access the compressor and service points from a bottom-mounted area, minimizing disruption during maintenance. The design reduces service time and supports predictable lifecycle management, aiding preventive maintenance planning.
#@@# Door and Storage Design#@#
Two solid doors provide thermal sealing and support shelving configurations for mixed loads, including boxed supplies and refrigerated packs.
#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#Ensure space accommodates stacked unit dimensions of 64.25" height. Requires a standard 115V power outlet and level flooring for stability.#@@#Maintenance Guide#@#Inspect condenser coils monthly and remove dust buildup with a soft brush to preserve heat exchange efficiency. Sanitize stainless steel interior and exterior with a pH-neutral detergent and a microfiber cloth; rinse and dry to prevent corrosion. Verify door gaskets for cracks and compress seals by pressing along the perimeter; replace gaskets if gaps exceed 1/8 inch. Level the unit and confirm voltage at 115 volts and frequency at 60 hertz for stable operation.
