Handle high-volume draft lines without sacrificing temperature control or reliability. This power pack delivers a dedicated 1/3 HP compressor and an 80 gph vane pump to maintain chilled glycol circulation for long draws, enabling consistent pour temperatures for extended service periods. Operators gain precise control through a digital thermostat and a visible exterior sight glass for quick status checks.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug the power pack and lock out the circuit. Drain and dispose of glycol per local rules; remove cover and wipe the 11.5 gallon bath with a mild detergent solution and soft cloth. Clean pump and compressor housing, removing grease and debris to maintain airflow. Brush condenser fins and vacuum coils every 90 days to keep efficiency and lower amps. Inspect seals, fittings, and electrical cord for wear; tighten loose connections. Dry all surfaces before restoring power.#@@#Additional Info#@#Micro Matic’s MMPP4301 Pro‑Line air-cooled power pack offers 0.33 HP refrigeration, 2,300 BTU cooling, 11.5 gallons glycol capacity, and an 80 gph pump.#@@#General Info#@#Description #@#
Handle high-volume draft lines without sacrificing temperature control or reliability. This power pack delivers a dedicated 1/3 HP compressor and an 80 gph vane pump to maintain chilled glycol circulation for long draws, enabling consistent pour temperatures for extended service periods. Operators gain precise control through a digital thermostat and a visible exterior sight glass for quick status checks.
#@@# Circulation Pump#@#
An 80 gph vane circulating pump with a 1/3 HP motor provides a high flow rate and steady glycol movement, supporting multiple draft runs without pressure drop. Technicians experience predictable performance that reduces line sweating and preserves product quality.
#@@# Glycol Capacity#@#
A sealed glycol bath holds an 11.5-gallon capacity to stabilize thermal mass during peak service and long runs. Managers reduce temperature variance across lines and extend holding time between service cycles.
#@@# Temperature Control#@#
A digital thermostat enables precise setpoint management and clear readouts for rapid adjustment in fast-paced environments. Staff can react quickly to shifting load conditions while maintaining target serving temperatures.
#@@# Cooling Method#@#
Air-cooled design eliminates water hookups and lowers installation complexity in most venues, simplifying placement and ongoing maintenance. Facilities conserve plumbing resources and avoid water use concerns while sustaining a rated 2,300 BTU cooling capacity.
#@@# Safety and Compliance#@#
cETLus certification and R-134a refrigerant meet common regulatory expectations and refrigerant handling standards for commercial installations. Engineers inspect a NEMA 5-15P power configuration and 115v/60/1-ph electrical requirements to ensure compatibility with existing circuits.
#@@# Serviceability#@#
An insulated cabinet with a removable cover and exterior sight glass allows rapid access for routine checks and cleaning without full disassembly.
#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Inspect condenser fins weekly and remove debris to maintain 2,300 BTU capacity and prevent airflow restriction. Drain and replace glycol to 11.5 gallons per manufacturer schedule; verify exterior sight glass level before each service. Clean pump strainer monthly and lubricate motor per Micro Matic guidelines. Verify 115v/60/1-ph connections and NEMA 5-15P plug for wear. Replace worn seals promptly to avoid glycol contamination.
