Four inch legs provide stable elevation and allow easy under-shelf floor cleaning and airflow while keeping the unit freestanding for flexible placement. The compact 15.5 inch depth fits narrow counters and holds depth-compatible pans without protrusion.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug the Hatco GRS-48-F before cleaning. Remove food debris and wash the stainless steel top and aluminum base with a mild detergent and soft cloth. Rinse and dry thoroughly. Clean heater area gently; avoid abrasive pads and direct water on controls. Inspect and wipe 4" legs and seals. Check condenser and vents monthly to remove grease and dust. Regular cleaning prevents contamination, fire risk, and equipment failure while improving efficiency and inspection compliance.#@@#Additional Info#@#Hatco’s GRS-48-F Glo-Ray heated shelf offers a 48" stainless steel surface, 500 Watts at 120v, and 4.2 amps for consistent holding. It features thermostatic control, an aluminum base for uniform heat, a freestanding 15.5" depth, and 4" legs.#@@#General Info#@#Description #@#
Four inch legs provide stable elevation and allow easy under-shelf floor cleaning and airflow while keeping the unit freestanding for flexible placement. The compact 15.5 inch depth fits narrow counters and holds depth-compatible pans without protrusion.#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Maintain the Hatco GRS-48-F heated shelf by following cleaning and inspection procedures. Disconnect power at the NEMA 5-15P plug before servicing. Clean stainless steel with nonabrasive detergent and warm water; rinse and dry to prevent spotting. Remove debris from the aluminum base and inspect the thermostatic control; calibrate if temperature deviates. Vacuum the condenser area weekly. Tighten electrical connections and check the 120v cord for wear; replace damaged cords.
