Two side-load drawers accept two full-size pans up to 6 inches deep, enabling segregated staging and continuous service. Move inventory between drawers without cross-contamination and maintain separate set points for different product profiles.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug unit and cool before cleaning. Remove pans and wipe interior with mild detergent and a soft cloth. Flush moisture reservoir and refill with clean water; check low water alarm function. Clean exterior stainless surfaces with non-abrasive cleaner and soft cloth. Vac or brush condenser coils every 3 months to maintain efficiency. Inspect door seals and magnetic handles for wear; replace damaged components. Dry all surfaces completely before reconnecting power.#@@#Additional Info#@#FWE PHTT-2DR-6SL stainless steel heated holding drawer features two side-load drawers for full-size 12" x 20" pans up to 6" deep, digital temperature control 90°F–200°F, moisture control 0%–90% RH, and alarms.#@@#General Info#@#Description #@#
Two side-load drawers accept two full-size pans up to 6 inches deep, enabling segregated staging and continuous service. Move inventory between drawers without cross-contamination and maintain separate set points for different product profiles.
Use thermostatic controls and a single temperature and moisture controller to minimize training and reduce operator error. Readouts present set point and actual values clearly, enabling quick adjustments during peak periods.
#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Maintain the FWE PHTT-2DR-6SL by descaling the water reservoir monthly and flushing with a 1:10 vinegar solution to prevent mineral buildup. Inspect drawer gaskets weekly and replace when tears exceed 1/8 inch. Clean stainless steel surfaces with a pH-neutral cleaner and soft cloth after each shift. Calibrate the thermostat quarterly using a traceable probe. Verify humidity sensor operation and empty low-water alarm before peak service to ensure reliable operation.
