NSF certification confirms the table meets commercial sanitation standards for food contact environments, simplifying inspections and procurement approvals. Purchasing managers receive a documented standard that supports regulatory compliance and risk mitigation.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug equipment and remove all items. Mix a mild detergent in warm water (use gallons or liters as needed) and wipe the 16 gauge Type 304 stainless steel top with a soft cloth. Scrub legs and crossrails with a non-abrasive pad. Rinse surfaces thoroughly and dry to prevent corrosion. Clean floor under table and check bullet feet for debris. Degrease oven hoods and vents regularly to prevent fires, reduce energy use, and help pass CSA inspections.#@@#Additional Info#@#Advance Tabco's TMG-2410 work table measures 120" × 24", has a 16 gauge Type 304 stainless steel top, a galvanized open base, adjustable plastic feet, a rounded bullnose edge, weighs 227 pounds, and meets NSF and CSA standards.#@@#General Info#@#Description #@#
NSF certification confirms the table meets commercial sanitation standards for food contact environments, simplifying inspections and procurement approvals. Purchasing managers receive a documented standard that supports regulatory compliance and risk mitigation.#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Inspect the Advance Tabco TMG-2410 work table weekly for surface residues and fastener loosening. Use a mild alkaline cleaner and a soft cloth to remove grease; rinse with potable water and dry to prevent spotting. Sanitize per HACCP protocols after heavy use. Tighten galvanized leg connections and verify adjustable plastic bullet feet for level; replace worn feet immediately. Buff scratches with nonabrasive polish to maintain Type 304 corrosion resistance.
