Stop compromising sanitation for speed. This stainless steel floor trough delivers continuous drainage capacity while withstanding intense foot traffic and heavy service demands, ensuring kitchens maintain cleaner floors with minimal interruption. Foodservice managers will appreciate the engineered pitch and robust construction that directs waste reliably to the outlet, reducing slip hazards and simplifying cleaning workflows.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug nearby equipment and remove debris from the trough. Mix mild detergent with warm water (use gallons or liters as needed) and scrub stainless steel surfaces and grates with a soft brush. Rinse thoroughly and flush the waste pipe until clear. Inspect seals and the 4" O.D. waste connection for leaks; tighten or replace parts as needed. Clean weekly to remove grease and bacteria, reduce fire risk, lower energy use, and ensure CSA and NSF compliance.#@@#Additional Info#@#Advance Tabco FTG-1284 floor trough is 84" W x 12" D x 4" H, made of 14 gauge 304 stainless steel with 3/16" x 1" bars, a 4" O.D. waste pipe, NSF certified, and weighs 126 pounds.#@@#General Info#@#Description #@#
Stop compromising sanitation for speed. This stainless steel floor trough delivers continuous drainage capacity while withstanding intense foot traffic and heavy service demands, ensuring kitchens maintain cleaner floors with minimal interruption. Foodservice managers will appreciate the engineered pitch and robust construction that directs waste reliably to the outlet, reducing slip hazards and simplifying cleaning workflows.
#@@# Sturdy Construction#@#
Fabricated from 14 gauge 304 stainless steel, the trough resists corrosion and tolerates frequent washdowns without structural degradation. Installers will note the full-length rigid body that maintains form under load and chemical exposure.
#@@# Precise Dimensions#@#
Measuring 84 inches long by 12 inches deep with a 4-inch interior depth, the unit fits long service lines and matches standard floor configurations for continuous drainage. Planners receive clear dimensional data to coordinate floor trenches and adjacent equipment.
#@@# Integrated Grating#@#
Engineered with stainless steel subway grating using 3/16 inch by 1 inch bars, the grate provides consistent surface support while allowing rapid flow of liquids and small solids. Maintenance crews access a durable, non-corroding surface that simplifies daily scraping and hosing.
#@@# Effective Waste Outlet#@#
Equipped with a 4-inch O.D. waste pipe and a 3-inch length to the drain connection, the trough directs effluent efficiently to the plumbing system and minimizes standing liquid. Plumbers gain a straightforward interface that reduces installation time and potential leak points.
#@@# Optimized Drain Pitch#@#
Built with a continuous pitch toward the waste outlet, the trough prevents pooling and channels runoff for complete evacuation during rinsing cycles. Sanitation teams observe faster clearance during cleaning and lower residual moisture that can harbor contaminants.
#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Inspect the FTG-1284 floor trough weekly for debris and remove grates to clear solids. Use a nylon brush and neutral pH detergent to scrub the 304 stainless steel surfaces, then rinse with potable water. Flush the 4" O.D. waste pipe monthly to prevent clogs; use a mechanical snake for buildup and check the 3"L tailpiece seals. Check welds and pitch toward waste quarterly and tighten fasteners as needed.
