Measuring 108 inches wide by 24 inches deep with a listed height of 40.5 inches, the table supports large-scale prep and staging across long service lines. Facility planners will allocate linear kitchen space efficiently while accommodating multiple operators simultaneously.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug equipment and clear the work surface. Use a mild detergent solution and a soft cloth to wipe the 14 gauge 304 stainless steel top and backsplash. Scrub sliding doors and cabinet interior with warm, soapy water; rinse and dry thoroughly to prevent corrosion. Clean legs and adjust hex feet; inspect seals. Remove grease from vents and oven areas with degreaser to reduce fire risk. Schedule regular coil and condenser cleaning to improve efficiency and avoid breakdowns.#@@#Additional Info#@#Advance Tabco CK-SS-249 offers a 108" x 24" work surface with a 14 gauge Type 304 stainless steel top, enclosed cabinet base with four sliding doors, 5" backsplash, adjustable stainless legs, and hex feet. NSF certified for heavy kitchen workflows.#@@#General Info#@#Description #@#
Measuring 108 inches wide by 24 inches deep with a listed height of 40.5 inches, the table supports large-scale prep and staging across long service lines. Facility planners will allocate linear kitchen space efficiently while accommodating multiple operators simultaneously.#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Inspect the stainless steel top and sliding doors weekly; tighten fasteners and adjust tracks for smooth operation. Clean surfaces daily with pH-neutral detergent and warm water, then rinse and dry to prevent spotting. Sanitize contact areas with an approved foodservice sanitizer per dwell time instructions. Lubricate adjustable hex feet quarterly and ensure they are level to avoid stress on welds. Replace worn seals or damaged components immediately to maintain CSA and NSF compliance.
