Measuring 84 inches wide by 30 inches deep with a 37 inch overall height footprint, this unit delivers substantial linear workspace and undercounter capacity. Operators expand prep lanes without sacrificing corridor access or interfering with adjacent equipment.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug equipment and clear surfaces. Scrape food debris, then wash with warm water and a mild detergent. Rinse thoroughly and sanitize food-contact areas with an EPA-approved sanitizer at labeled concentration. Clean oven vents, grease traps, and condenser coils weekly to prevent fires and improve efficiency. Inspect seals and moving parts; tighten or replace worn components. Dry surfaces completely before restoring power to stop corrosion and contamination.#@@#Additional Info#@#Advance Tabco CF-SS-307M is an 84" x 30" work table with a 14 gauge Type 304 stainless steel top and 1-1/2" rear upturn. NSF-certified; it has a mid-shelf, sliding doors, stainless legs, adjustable hex feet, and weighs 358 pounds.#@@#General Info#@#Description #@#
Measuring 84 inches wide by 30 inches deep with a 37 inch overall height footprint, this unit delivers substantial linear workspace and undercounter capacity. Operators expand prep lanes without sacrificing corridor access or interfering with adjacent equipment.#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Inspect the CF-SS-307M work table weekly for loose fasteners and damaged welds; tighten hardware and repair welds immediately to avoid structural failure. Clean the 14 gauge Type 304 stainless top with a nonabrasive detergent and warm water; rinse and dry to prevent water spots. Lubricate sliding door tracks monthly with food-grade lubricant and clear debris. Verify adjustable hex feet and level the unit to distribute loads evenly. Store abrasive chemicals separately.
