At approximately 0.7 pounds, the disc balances robustness with manageable handling during changeovers. Staff can swap plates rapidly between tasks, lowering downtime during shift transitions. This efficient design ensures that operations remain smooth and effective, contributing to overall productivity in busy kitchen environments.
LongDescription#@#NA#@@#Cleaning Instructions#@#Remove the disc from the processor and wear cut-resistant gloves. Rinse loose debris under warm water. Prepare a mild detergent solution and scrub both sides with a soft brush, following the 8 x 8mm cutting holes. Rinse thoroughly with potable water and inspect for bent teeth or corrosion. Air-dry completely before reinstalling. Clean after each use to prevent bacteria buildup, reduce fire risk from grease, and extend component life.#@@#Additional Info#@#Robot Coupe 27048 5/16" x 5/16" Julienne Disc creates consistent 8 x 8mm cuts for high-volume kitchens.#@@#General Info#@#Description #@#
At approximately 0.7 pounds, the disc balances robustness with manageable handling during changeovers. Staff can swap plates rapidly between tasks, lowering downtime during shift transitions. This efficient design ensures that operations remain smooth and effective, contributing to overall productivity in busy kitchen environments.#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Maintain the Robot Coupe 27048 5/16" x 5/16" Julienne Disc by inspecting blades for nicks and debris before use. Remove disc and wash with warm, soapy water; rinse thoroughly and air dry to prevent corrosion. Lubricate drive fittings per manufacturer intervals using food-grade lubricant. Store discs vertically to avoid warping. Verify alignment and secure mounting each installation. Replace worn parts to preserve cut consistency and operator safety.
