Stop sacrificing uptime for convenience. This glycol-cooled dispense system installation kit provides a complete set of components to install and maintain chilled draft lines with reliable temperature control and robust mechanical connections. Installers and operations managers gain a consolidated package that reduces sourcing time and ensures component compatibility for glycol loop applications.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug dispensing components and drain glycol. Remove fittings and wipe all surfaces with a mild detergent solution. Use a soft brush on coils and tubing; flush lines with approved cleaner and rinse until clear. Inspect clamps, seals, and hoses; replace damaged parts. Dry components before reassembly. Clean vents and drip trays weekly to prevent grease buildup, reduce fire risk, and meet CSA and health inspection standards.#@@#Additional Info#@#Micro Matic's IK-3 0.4" Glycol Cooled Dispense System Installation Kit includes 20 ft. glycol lines, clamps, splicers, elbows, U-bends, vinyl hose, tapes, cutter, clips, tubing, and restrictors for reliable beverage dispensing.#@@#General Info#@#Description #@#
Stop sacrificing uptime for convenience. This glycol-cooled dispense system installation kit provides a complete set of components to install and maintain chilled draft lines with reliable temperature control and robust mechanical connections. Installers and operations managers gain a consolidated package that reduces sourcing time and ensures component compatibility for glycol loop applications.
#@@# Line Accessories#@#
This kit includes multiple stepless clamps in varied sizes and stainless steel tail pieces to secure tubing and fittings under continuous flow conditions. Installers achieve consistent sealing and reduced leak risk by using matched clamp ranges and 3/8" 304 stainless tail pieces built for corrosion resistance.
#@@# Glycol Tubing#@#
Twenty feet of pre-wrapped glycol lines provide insulated glycol circulation ready for immediate routing between tower and cooler. Technicians save labor on field insulation and maintain chilled temperatures over run lengths through factory-wrapped containment.
#@@# Stainless Fittings#@#
The package supplies stainless steel splicers, elbows, and U-bends to create durable, sanitary joins throughout the run. Fabricators avoid mixed-metal failure points and preserve flow integrity with 304-grade components specified for beverage environments.
#@@# Insulation Materials#@#
Barrier tape, foil tape, foam insulation tape, and moisture tape arrive with the kit to complete thermal and vapor barriers on the lines. Field crews control condensation and thermal ingress by applying the supplied tapes and foam to exposed runs and junctions.
#@@# Control Components#@#
The kit contains spiral beer line restrictors and an instructions sheet for restrictor kits to manage flow rates and pour consistency. Operators tune dispense performance and reduce foam or waste by matching restrictors to line length and system pressure.
#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Inspect glycol lines weekly and flush with manufacturer-recommended solution to prevent biofilm and flavor transfer. Clean fittings and splicers with food-safe sanitizer after disassembly, then reapply barrier tape and foil tape to maintain vapor seal. Verify clamps and mounting clips remain tight; replace any corroded stainless parts. Monitor insulation integrity and reseal foam tape where gaps appear. Document service dates and fluid volumes in gallons or liters for traceability.
