Stop compromising draft integrity for convenience. This dual tap shank delivers precise, consistent flow control for high-volume dispensing lines while minimizing pressure loss and foam. Designed for commercial bars and foodservice operations, the component integrates seamlessly into standard draft assemblies and supports continuous service with simple maintenance.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug equipment and remove product. Flush lines with warm water, then circulate a food-safe detergent solution for 5–10 minutes. Rinse with potable water until detergent clears. Sanitize surfaces and beer-contact parts with an approved sanitizer at manufacturer concentration; contact time must meet CSA or supplier specs. Scrub vents and coil fins to remove grease and dust. Dry components fully before reassembly and power-up.#@@#Additional Info#@#Micro Matic BE-DF4-3 dual tap shank is 4" long with a 0.19" ID, connecting beverage lines to faucets for draft systems. It's built for commercial use, ensuring flow consistency and routine sanitation, meeting CSA quality standards for food service.#@@#General Info#@#Description #@#
Stop compromising draft integrity for convenience. This dual tap shank delivers precise, consistent flow control for high-volume dispensing lines while minimizing pressure loss and foam. Designed for commercial bars and foodservice operations, the component integrates seamlessly into standard draft assemblies and supports continuous service with simple maintenance.
#@@# Flow Capacity#@#
Designed with a 0.19-inch internal diameter, the shank provides stable flow suitable for paired tap setups. Technicians can expect predictable pour rates that maintain beer head and minimize waste when matched with appropriate upstream regulators.
#@@# Dual-Tap Configuration#@#
The unit accommodates two faucet connections from a single mounting point, optimizing bar real estate and simplifying dispenser layouts. Installers achieve compact routing and reduced countertop penetration without sacrificing accessibility for service.
#@@# Durable Construction#@#
Fabricated for commercial environments, the shank resists common wear mechanisms encountered in draft systems. Operators will observe extended service life and fewer replacements under normal usage cycles.
#@@# Standard Dimensions#@#
The component measures 4 inches in length with a 3/16-inch internal bore, matching established draft hardware standards. Service personnel can plan installations with confidence using these exact measurements for depth and clearance calculations.
#@@# Maintenance Accessibility#@#
Engineers will appreciate straightforward access for cleaning and inspection, supporting routine sanitation protocols. The design allows quick disconnect of faucets for manual cleaning or component swaps during scheduled downtime.
#@@# System Compatibility#@#
The part integrates with typical couplers, distributors, and regulators used in commercial draft assemblies, enabling flexible system design. Purchasing agents can deploy the shank across multiple locations, knowing it fits common service configurations.
#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Maintain the Micro Matic BE-DF4-3 4" x 0.19" ID dual tap shank by inspecting O-rings and hoses weekly for wear and replacing defective parts promptly. Flush lines with approved cleaner after each keg change to prevent buildup; circulate cleaner for recommended dwell time and rinse until pH neutral. Lubricate threads and fittings with food-grade lubricant quarterly. Calibrate fittings and verify leak-free connections before service each day.
