The unit measures approximately 12 inches deep with a 20-inch height and weighs 50 pounds, providing a compact yet substantial solution for undercounter installation. Designers will fit this package into tight service lines while accounting for support and mounting brackets.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug the disposer and shut power at the breaker. Remove debris and wipe the 15" stainless bowl with a mild detergent and soft cloth. Flush the unit with warm water while running cold tap water and operate the 1 HP motor briefly to clear particles. Clean splash guards and inlet area with a non-abrasive cleaner. Inspect seals and tighten mounting hardware. Schedule coil and vent checks to prevent grease buildup, reduce fire risk, and ensure CSA-compliant operation.#@@#Additional Info#@#The InSinkErator SS-100-15B-AS101 disposer has a 15" stainless steel bowl, all-stainless housing, delivers 1 HP at 115v, accepts a 6-5/8" inlet, weighs 50 pounds, and is cULus certified for commercial kitchens.#@@#General Info#@#Description #@#
The unit measures approximately 12 inches deep with a 20-inch height and weighs 50 pounds, providing a compact yet substantial solution for undercounter installation. Designers will fit this package into tight service lines while accounting for support and mounting brackets.#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Inspect the InSinkErator SS-100-15B-AS101 disposer weekly for leaks and check mounting hardware for tightness. Flush the chamber with cold water for 30 seconds after each heavy use to clear solids. Run a quarter cup of baking soda followed by vinegar monthly, then rinse with two gallons of cold water to deodorize and dislodge buildup. Replace worn seals and gaskets annually and verify electrical connection to 115 volts, 60 Hz, 1-Ph for safe, consistent operation.
