Stop sacrificing recovery time for wash temperature. This liquid propane booster heater delivers robust heat output and consistent thermal recovery, ensuring high-capacity dish lines maintain sanitizing temperatures without interruption. Designed specifically for commercial dishwashing systems, it combines a stainless steel storage tank with industrial controls to sustain elevated rinse cycles during continuous operations.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug and shut gas supply. Drain the 4.75 gallons and flush tank with fresh water. Clean exterior stainless steel with mild detergent and soft cloth; avoid abrasive pads. Remove scale from blended phosphate system per manufacturer intervals. Inspect and clean temp/pressure relief valve, gauges, and pressure reducing valve. Vacuum burner area and vents to remove grease. Verify low-water cut-off operation. Dry all components before restoring power and relighting pilot.#@@#Additional Info#@#Hatco PMG-200-LP is a 4.75 Gal stainless steel liquid propane booster heater with 195,000 BTU output, 120 volts, 1-Ph operation, and 45.7 kW equivalent.#@@#General Info#@#Description #@#
Stop sacrificing recovery time for wash temperature. This liquid propane booster heater delivers robust heat output and consistent thermal recovery, ensuring high-capacity dish lines maintain sanitizing temperatures without interruption. Designed specifically for commercial dishwashing systems, it combines a stainless steel storage tank with industrial controls to sustain elevated rinse cycles during continuous operations.
#@@# Tank Capacity#@#
The unit stores 4.75 gallons, providing a steady hot water reserve for back-to-back cycles. Operators benefit from reduced cold-water draw and fewer pauses between loads, significantly improving throughput during peak service times.
#@@# Heat Output#@#
The heater produces 195,000 BTU, supplying rapid thermal recovery for large warewashing machines. Kitchens gain reliable temperature maintenance that supports regulatory rinse requirements while minimizing heat sag under heavy demand.
#@@# Construction Quality#@#
The stainless steel tank and front deliver excellent corrosion resistance, especially where water chemistry stresses components. Technicians report longer component life and simpler sanitation compared to painted-only tanks.
#@@# Control Package#@#
Integrated controls include two temperature and pressure gauges, an on/off indicator light, and a manual switch for straightforward operation. Users can monitor system status at a glance and adjust operations without needing complex interfaces.
#@@# Safety Features#@#
The system incorporates a low water cut-off, temperature/pressure relief valve, and pressure reducing valve to protect against overpressure and dry-fire conditions. Maintenance teams can reduce risk exposure and simplify compliance documentation.
#@@# Utility Specifications#@#
Configured for liquid propane with a 120-volt electrical connection, 1-Phase, 60 Hertz, and rated at approximately 45.7 kilowatts electrical equivalence for controls and ignition.
#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Inspect the Hatco PMG-200-LP booster heater weekly for leaks and burner soot; tighten fittings and replace any degraded gaskets. Flush the 4.75 gallons storage tank monthly to remove sediment; follow phosphate water treatment and verify low water cut-off operation after service. Clean stainless surfaces with nonabrasive cleaner and dry to prevent corrosion. Calibrate pressure gauges and test temp/pressure relief and reducing valves quarterly to ensure safe, efficient operation.
