At 28 inches wide, 36 inches high, and 24.13 inches deep, the cooler fits standard bar cutouts while offering a 20-inch door opening for easy keg handling. Installers will value the 1-inch stainless finished top for a flush work surface and the galvanized steel back for structural support.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug the unit and remove kegs. Empty drip trays and wipe spills with a mild detergent solution. Remove and wash keg rack and shelves in warm, soapy water; rinse and dry. Brush condenser coils and vacuum debris every 3 months to maintain efficiency. Clean door gaskets with a soft cloth and inspect seals for wear; replace if damaged. Sanitize interior surfaces using an approved CSA-approved sanitizer. Allow parts to dry completely before reconnecting power.#@@#Additional Info#@#Glastender C1SB28-DD is a 28" stainless steel draft cooler with front venting, R-290 refrigeration, 1/8 HP compressor, LED lighting, NSF Standard 7 compliance, ETL-Sanitation, cETLus certifications, 120v operation, and a welded keg rack.#@@#General Info#@#Description #@#
At 28 inches wide, 36 inches high, and 24.13 inches deep, the cooler fits standard bar cutouts while offering a 20-inch door opening for easy keg handling. Installers will value the 1-inch stainless finished top for a flush work surface and the galvanized steel back for structural support.#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Inspect condenser coils monthly, removing dust with a soft brush and vacuum to maintain efficiency. Empty and sanitize the stainless steel interior weekly with a food-safe detergent and warm water; rinse and dry to prevent corrosion. Verify door gasket integrity biweekly and replace seals with cracks to maintain temperatures. Level the unit and confirm venting clearance per guidelines for airflow.
