The wall-mount configuration frees floor space and integrates with existing workflows for counters, ranges, and service lines. Technicians install the shelf at optimal ergonomic heights to streamline handling and maximize usable surface area.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug any nearby appliances and clear the shelf. Wipe the Advance Tabco WS-10-84 with a mild detergent and warm water using a soft cloth. Scrub bullnose and rear up-turn corners to remove grease and food residue. Rinse with clean water and dry thoroughly to prevent corrosion. Clean weekly or more often in high-use areas. Maintain condenser coils and ventilation nearby to reduce fire risk and ensure CSA-compliant performance.#@@#Additional Info#@#Advance Tabco WS-10-84 wall shelf is 84" W x 10" D, made of 18-gauge 430 stainless steel with a satin finish. It features a 1-5/8" bullnose front, 1-1/2" rear up-turn, NSF certification, and three brackets for stability in commercial kitchens.#@@#General Info#@#Description #@#
The wall-mount configuration frees floor space and integrates with existing workflows for counters, ranges, and service lines. Technicians install the shelf at optimal ergonomic heights to streamline handling and maximize usable surface area.#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Inspect the Advance Tabco WS-10-84 shelf weekly for loose brackets and secure mounting hardware. Clean the 18 gauge stainless steel with a neutral pH detergent and warm water, then rinse and dry to prevent spotting. Remove grease with a food-safe degreaser, then polish satin finish using a microfiber cloth. Verify NSF compliance labels periodically and replace worn anchors immediately. Balance loads; do not exceed rated capacity to maintain structural integrity.
