NSF certification confirms suitability for foodservice operations, and the 120-inch width accommodates large continuous storage runs. Facilities teams will streamline layout planning because the shelf matches common commercial kitchen dimensions and regulatory expectations.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug nearby equipment before cleaning. Remove loose debris and wash shelf with a mild detergent solution and a soft cloth. Rinse with clear water and dry completely to prevent corrosion. Clean bullnose edge and rear up-turn with a non-abrasive pad. Sanitize food-contact surfaces following CSA guidelines. Inspect brackets and seals; tighten fasteners as needed. Clean weekly or more often under heavy use to prevent grease buildup, reduce fire risk, and maintain NSF compliance.#@@#Additional Info#@#Advance Tabco's WS-10-120 wall-mounted shelf is 120" W x 10" D, made of 18-gauge 430 stainless steel with a satin finish. It features a bullnose front, rear up-turn, and NSF certification, supporting 32 pounds for commercial kitchens.#@@#General Info#@#Description #@#
NSF certification confirms suitability for foodservice operations, and the 120-inch width accommodates large continuous storage runs. Facilities teams will streamline layout planning because the shelf matches common commercial kitchen dimensions and regulatory expectations.#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Install the Advance Tabco WS-10-120 shelf using heavy-duty anchors and verify the unit sits level to distribute load evenly. Clean the 18 gauge stainless steel satin surface with a neutral pH cleaner and microfiber cloth; rinse with potable water and dry to prevent spotting. Inspect welds, bullnose front, and rear up-turn for deformation weekly; tighten brackets and fasteners to CSA torque specifications. Replace damaged seals or supports immediately to maintain NSF compliance.
