Equip workspaces with a durable three-sided wall splash designed for mop sink installations, engineered to protect walls and simplify sanitation in high-use utility areas. This unit mounts behind and on both sides of a 9-OP-34 mop sink to contain splashes and reduce cleaning cycles, providing a controlled wet zone that preserves surrounding finishes. Installers should verify faucet clearance, as the splash extends 16 inches above the sink.
LongDescription#@#NA#@@#Cleaning Instructions#@#Install the Advance Tabco K-304 splash on the 9-OP-34 mop sink, fastening left, right, and back panels to the wall. Verify faucet clearance; splash extends 16" above the sink. Clean stainless steel with mild detergent and warm water; rinse and dry to prevent corrosion. Remove heavy grease with a sodium-based degreaser; rinse well. Inspect seals and wall anchors monthly. Regular cleaning prevents contamination, fires, higher costs, and equipment failure.#@@#Additional Info#@#Advance Tabco K-304 three-sided wall splash installs around the 9-OP-34 mop sink to protect walls; it extends 16" above the sink, fits a 24" width and 48" depth, weighs 51 pounds, and meets CSA standards for foodservice.#@@#General Info#@#Description #@#
Equip workspaces with a durable three-sided wall splash designed for mop sink installations, engineered to protect walls and simplify sanitation in high-use utility areas. This unit mounts behind and on both sides of a 9-OP-34 mop sink to contain splashes and reduce cleaning cycles, providing a controlled wet zone that preserves surrounding finishes. Installers should verify faucet clearance, as the splash extends 16 inches above the sink.
#@@# Material Gauge#@#
Constructed from commercial-grade stainless steel, the splash offers corrosion resistance suited for continuous wet conditions. Contractors will find the sheet thickness appropriate for daily cleaning without deformation, ensuring long-term dimensional stability.
#@@# Dimensional Fit#@#
Measuring 24 inches wide by 16 inches high with a 48-inch depth overall, the configuration covers three sides of the mop sink footprint for comprehensive containment. Facility planners can confirm compatibility with 9-OP-34 sinks and assess clearance requirements before field installation.
#@@# Installation Ready#@#
Designed for field installation by qualified personnel, the splash arrives ready to fasten to existing wall surfaces using standard anchors and sealants. Maintenance teams will perform quick attachment and seal verification to maintain a watertight perimeter.
#@@# Hygiene Performance#@#
The three-sided barrier reduces wall contamination and simplifies hygiene protocols by limiting splash transfer during mop-out operations. Environmental services staff encounter fewer sanitation failures and can allocate labor to other tasks.
#@@# Compliance Support#@#
This product ships with components that assist compliance with sanitation standards and carries NSF Certified status for commercial equipment use. Managers will document equipment selection to support audits and health inspections.
#@@# Weight and Handling#@#
Weighing 51 pounds, the assembly requires two technicians for safe handling and positioning during installation.
#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Install the Advance Tabco K-304 three-sided wall splash to protect surrounding surfaces for a 9-OP-34 mop sink; confirm faucet clearance before field installation. Clean stainless surfaces weekly with a neutral detergent and soft cloth. Remove mineral deposits with a 1:1 vinegar and water solution; rinse thoroughly. Inspect mounts and seams monthly and tighten fasteners to maintain a secure seal. Follow CSA and local codes during installation and service.
