The three-sided wall splash installs behind and beside a mop sink to contain splashes and protect walls in heavy-use janitorial and utility areas. Designed for compatibility with specified mop sink models, the unit improves cleanliness control while simplifying installation and maintenance.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug nearby equipment and remove obstructions. Wipe stainless steel splash on all three sides with a mild detergent and warm water using a soft cloth. Scrub joints and mounting flange with a nylon brush to remove grease. Rinse thoroughly and dry with a clean towel to prevent corrosion. Inspect gasket and mounting fasteners; tighten or replace as needed. Clean weekly or when soil accumulates to maintain food safety, lower fire risk, reduce energy waste, and pass CSA inspections.#@@#Additional Info#@#Advance Tabco K-298 three-sided wall splash fits 9-OP-20 and 9-OP-40 mop sinks, mounts to walls, and extends 16" above the sink; verify faucet clearance. Weighing 38 pounds, it installs in the field for commercial kitchens.#@@#General Info#@#Description #@#
The three-sided wall splash installs behind and beside a mop sink to contain splashes and protect walls in heavy-use janitorial and utility areas. Designed for compatibility with specified mop sink models, the unit improves cleanliness control while simplifying installation and maintenance.
This splash fits 9-OP-20 and 9-OP-40 mop sink installations, providing a defined protective barrier on left, right, and back sides. Technicians can verify faucet interference because the splash extends 16 inches above the sink, enabling precise placement.
Constructed to block water and chemical spray from reaching adjacent surfaces, the splash reduces repainting and drywall repairs. Facilities managers benefit from lower repair frequency and improved wall longevity.
Fabricators or maintenance teams perform final installation on site, allowing adjustments for existing plumbing and mounting conditions. This approach minimizes shipping damage and lets crews confirm clearances before securing the unit.
With a 16-inch rise above the sink, the splash delivers ample containment for routine mop and rinse operations. Supervisors should confirm faucet geometry to avoid obstruction and maintain full functionality.
Engineered as a sturdy accessory, the splash weighs 38 pounds and resists casual impact in utility areas. Maintenance staff receive a robust unit that stays in position under typical operational stresses.
The component integrates with commercial cleaning setups and aligns with standard shop-by-brand replacement workflows. Purchasing teams obtain a direct-fit accessory intended for commercial sink configurations without altering sink performance.
#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Install the Advance Tabco K-298 three-sided wall splash by securely fastening left, right and back panels to the surrounding wall, ensuring the unit extends 16" above the 9-OP-20 or 9-OP-40 mop sink and verifying faucet clearance. Clean stainless surfaces daily with neutral detergent and soft cloth; remove scale with nonabrasive descaler. Inspect anchors weekly, torque fasteners to spec, and touch up sealant to prevent corrosion.
