Weighing 44 pounds, the trough balances durability with manageable installation handling. Service staff can position the unit using standard two-person lift techniques without requiring specialized lifting equipment.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug nearby equipment and drain residual water. Remove stainless steel grates and soak in a mild detergent solution; scrub with a soft brush and rinse. Wipe trough interior with a non-abrasive cleaner, paying corners and welds to remove grease and biofilm. Clean floor drain connection and test flow. Dry all surfaces and reinstall grates. Schedule weekly coil and grate checks to prevent clogs, reduce fire risk, and maintain CSA compliance.#@@#Additional Info#@#Advance Tabco FTG-724 24" x 7.5" x 4" floor trough is made from 14-gauge 304 stainless steel.#@@#General Info#@#Description #@#
Weighing 44 pounds, the trough balances durability with manageable installation handling. Service staff can position the unit using standard two-person lift techniques without requiring specialized lifting equipment.#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Maintain the Advance Tabco FTG-724 floor trough by removing grates and flushing debris daily to prevent clogs. Inspect welds and seams weekly; tighten or replace fasteners as required. Clean with neutral pH detergent and soft brush, then rinse thoroughly to avoid residue. Sanitize surfaces per facility protocol using EPA-registered agents compatible with stainless steel. Verify slope and drain connection quarterly and record maintenance actions for CSA compliance.
