Built for continuous use in demanding kitchens, this stainless steel floor trough combines heavy construction with a practical drainage design to protect floors and streamline waste handling. Engineers sized the unit at 108 inches by 18 inches with a 4-inch depth to capture runoff across long workstations while maintaining a low profile for safe traffic flow. Operators will appreciate NSF certification and robust 14-gauge material that tolerates daily commercial wear without warping.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug nearby equipment and remove debris. Scrub stainless steel with mild detergent and warm water using a non-abrasive pad. Rinse and inspect the fiberglass grate for buildup; lift and wash in hot, soapy water. Clear both 4" O.D. waste openings and check pitch toward drains. Dry all surfaces to prevent corrosion. Clean weekly or more often under heavy use to reduce bacteria, lower fire risk from grease, improve efficiency, and help pass inspections.#@@#Additional Info#@#Advance Tabco FFTG-18108 floor trough measures 108" W x 18" D x 4" H, constructed in 14 gauge stainless steel with fiberglass grate; unit includes two pitched drains with 4" O.D. waste piping, NSF certified, and weighs 138 pounds.#@@#General Info#@#Description #@#
Built for continuous use in demanding kitchens, this stainless steel floor trough combines heavy construction with a practical drainage design to protect floors and streamline waste handling. Engineers sized the unit at 108 inches by 18 inches with a 4-inch depth to capture runoff across long workstations while maintaining a low profile for safe traffic flow. Operators will appreciate NSF certification and robust 14-gauge material that tolerates daily commercial wear without warping.
#@@# Fiberglass Grate#@#
The fiberglass grate prevents debris from entering drains while resisting chemical degradation common in cleaning cycles. Maintenance teams can remove and reinstall the grate quickly for scheduled cleaning without special tools, reducing downtime during service hours.
#@@# Dual Drain Openings#@#
The design includes two drain openings that direct flow efficiently and reduce pooling along the trough length. Plumbers connect a 4-inch O.D. waste pipe with a 3-inch length to standard drainage systems for reliable throughput under high flow conditions.
#@@# Pitched Toward Waste#@#
The design features a consistent pitch toward waste to ensure gravity assists in clearing liquid and solids. Floor staff experience fewer clogs and less manual mopping when the trough channels liquids directly to the drains.
#@@# 14 Gauge Construction#@#
Fabrication from 14-gauge stainless steel delivers the strength needed for heavy-duty environments while offering corrosion resistance to cleaning agents. Supervisors can rely on dimensional stability and long service life where frequent impact and moisture occur.
#@@# Non Anti-Splash Design#@#
Engineers specified a non-anti-splash pan type to allow rapid overruns into the trough during heavy washdowns without redirecting flow back onto floors. Line workers benefit from predictable flow patterns that minimize trip hazards and wet spots.
#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Inspect the FFTG-18108 floor trough weekly for debris and remove accumulated solids to prevent blockages. Use a nonabrasive stainless steel cleaner and soft cloth to wipe all exposed surfaces; rinse with potable water and dry to prevent residue. Verify fiberglass grate seating and tighten fasteners quarterly. Flush drains with hot water monthly and confirm waste pipe pitch toward outlet. Replace damaged seals promptly to maintain CSA and NSF compliance.
