Stop sacrificing organization for speed. This table-mounted double-sided slant rack enhances undercounter workflow by combining heavy-duty stainless construction with angled shelving that accelerates drying and sorting while occupying minimal space. Food service teams will handle racks and trays more efficiently, reduce handling time, and maintain CSA-compliant storage practices.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug equipment and clear shelves. Scrape debris, then wash stainless steel surfaces with a mild detergent and warm water using a soft cloth. Rinse thoroughly and sanitize food-contact areas with an approved sanitizer per CSA guidelines. Dry all components before reuse. Clean vents, condenser coils, and grease traps weekly to prevent fires and inefficiency. Inspect seals and mounts; tighten fasteners and replace worn parts to avoid breakdowns and failed inspections.#@@#Additional Info#@#Advance Tabco's DTA-79S table-mounted, double-sided slant shelf mounts to dishtables, measures 31.38" high and 27.38" deep, and uses stainless steel for NSF-compliant durability; sold per linear foot with a 4 ft minimum and a 20-pound weight.#@@#General Info#@#Description #@#
Stop sacrificing organization for speed. This table-mounted double-sided slant rack enhances undercounter workflow by combining heavy-duty stainless construction with angled shelving that accelerates drying and sorting while occupying minimal space. Food service teams will handle racks and trays more efficiently, reduce handling time, and maintain CSA-compliant storage practices.
#@@# Table Mounted#@#
Mounts directly to standard worktables, providing secure support for sorting operations and maximizing usable area. Installers will attach the unit per linear foot with a minimum 4 ft run, enabling scalable layouts that fit kitchen footprints.
#@@# Double Sided#@#
Offers access from both sides to speed up loading and unloading, reducing staff travel and turnaround times during peak shifts. Operators will stage soiled or clean trays on one side and remove from the opposite side to streamline workflow.
#@@# Slant Shelves#@#
Features slanted shelf planes that promote drainage and air circulation, cutting drying time and minimizing microbial risk. Supervisors will notice faster processing of racks and reduced reliance on additional drying equipment.
#@@# Solid Base#@#
Includes a solid base design that supports heavy trays and equipment without sagging, maintaining shelf alignment under repeated load cycles. Managers will benefit from consistent performance and lower maintenance needs.
#@@# Stainless Construction#@#
Fabricated entirely from stainless steel to resist corrosion and simplify sanitation, meeting institutional cleaning protocols. Maintenance teams will clean surfaces quickly and preserve the finish over years of daily use.
#@@# Space Efficient#@#
Measures 31.38 inches high with approximately 27.38 inches depth, fitting beneath common overhead constraints while increasing vertical storage density. Planners will install multiple linear feet to expand capacity without enlarging the footprint.
#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Install the Advance Tabco DTA-79S securely to a level table using corrosion-resistant fasteners and verify mount points every month. Clean stainless steel surfaces daily with a non-abrasive detergent and warm water; rinse thoroughly and dry to prevent spotting. Inspect welds and slant angles weekly for deformation and tighten hardware to maintain alignment. Replace worn seals or damaged components immediately to preserve NSF compliance and operational reliability.
