Leg-mounted base with 23-3/4 inch height and removable components support routine maintenance and access for cleaning. A 464 pound construction provides stability for heavy use while allowing technicians to service controls and burners when required.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug the oven and shut off the gas. Remove racks and wash with warm, soapy water. Scrub the porcelain interior with a non-abrasive pad. Clear debris from the door gasket and window, then wipe with mild detergent. Clean the burner area and vent paths with a degreaser for commercial kitchens. Clean condenser coils and ventilation filters to improve efficiency and lower bills. Dry all surfaces and reseat racks before reconnecting power and gas.#@@#Additional Info#@#Wolf WC4GD-NG stainless steel convection oven offers 50,000 BTU natural gas heating, solid-state controls, a 60-minute timer, porcelain interior, five pan capacity, 120v 1-Ph 7.7 amps, and is ENERGY STAR, NSF, CSA Star, and CSA Flame certified.#@@#General Info#@#Description #@#
Leg-mounted base with 23-3/4 inch height and removable components support routine maintenance and access for cleaning. A 464 pound construction provides stability for heavy use while allowing technicians to service controls and burners when required.#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Inspect burner ports and pilot assembly weekly; remove soot with a soft brush and check the electronic spark igniter. Flush condensate and drip trays monthly, sanitize with mild detergent, and rinse thoroughly. Clean porcelain interior after each service day with nonabrasive cleaners to prevent pitting. Wipe stainless steel exterior with a neutral pH cleaner and microfiber cloth to avoid streaks. Verify door gasket integrity and level legs quarterly; tighten fasteners and adjust as needed.
