Stop compromising display with refrigeration capacity. This countertop pass-through merchandiser delivers rigorous temperature control and clear product visibility while fitting seamlessly on busy service lines to enhance service flow and product turnover. Operators gain reliable refrigeration that integrates into tight spaces and supports continuous access for both front and back of house.
LongDescription#@#NA#@@#Cleaning Instructions#@#Unplug the unit and remove all contents. Wipe interior with mild soap and warm water, scrub shelves and door gaskets, then rinse and dry. Vacuum condenser coils and clear ventilation every month to maintain efficiency and reduce fire risk. Clean exterior stainless steel with non-abrasive cleaner, following grain. Inspect seals and replace worn gaskets. Track cleaning schedule to prevent contamination, lower energy use, and avoid equipment failure.#@@#Additional Info#@#The True GDM-05PT-S-HC~FGD01 is a 24" stainless steel pass-thru merchandiser operating on 115 volts, 60 Hz, using R-290 refrigerant and a 1/5 HP compressor. It weighs 165 pounds and includes hinged glass doors and CSA certification.#@@#General Info#@#Description #@#
Stop compromising display with refrigeration capacity. This countertop pass-through merchandiser delivers rigorous temperature control and clear product visibility while fitting seamlessly on busy service lines to enhance service flow and product turnover. Operators gain reliable refrigeration that integrates into tight spaces and supports continuous access for both front and back of house.
#@@# Construction Quality#@#
The stainless steel exterior provides corrosion resistance and a service-ready surface that withstands daily cleaning protocols. Engineers designed the unit for commercial environments, offering a durable finish that supports frequent handling and rigorous sanitation routines.
#@@# Cooling Performance#@#
Top-mounted, self-contained refrigeration with a 1/5 HP compressor maintains consistent hold temperatures for perishable items. Technicians selected R-290 refrigerant to optimize cooling efficiency while meeting current environmental performance standards.
#@@# Pass-Through Access#@#
Hinged glass doors on both sides enable simultaneous access from service and prep areas, reducing door open time and preserving internal temperature stability. Staff gain faster product retrieval and simplified stocking during peak service periods.
#@@# Electrical And Capacity#@#
The merchandiser operates on 115 volts at 60 hertz with a NEMA 5-15P plug and draws 2.7 amps, allowing straightforward connection to standard circuits in commercial kitchens. The design size measures 24 inches wide with a height of 36.25 inches and a depth of 23.63 inches, matching common countertop and passthrough layouts.
#@@# Energy And Certification#@#
CSA certification confirms compliance with applicable safety and performance standards, and the unit ships configured for single-phase operation to simplify installation. Manufacturers built the system in the United States and provided optimized components for reliable operation under continuous duty.
#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#Inspect upon delivery and report any damages immediately.#@@#Maintenance Guide#@#Inspect condenser coils weekly; use a soft brush or vacuum to remove dust for heat transfer efficiency. Wipe the stainless steel exterior with a damp cloth and mild detergent, then dry to prevent spotting. Defrost the evaporator as needed; remove food, power down, and follow the defrost procedure to avoid compressor strain. Check door hinges and gaskets monthly; tighten fasteners and replace cracked seals. Verify thermostat calibration quarterly and log temperatures between 34°F and 38°F.
