This 10" carbon block replacement filters particulates and chlorine taste while maintaining flow rates for busy kitchens and service lines. Facilities achieve consistent filtration performance with a compact cartridge that fits standard housings and minimizes downtime.
LongDescription#@#NA#@@#Cleaning Instructions#@#Wipe the carbon block housing and high-touch surfaces with a neutral detergent and a soft cloth. Apply an EPA-registered sanitizer per label directions. Rinse metal parts with potable water and dry immediately to prevent corrosion. Inspect seals and threads for debris; remove with a soft brush. Clean weekly in high-traffic areas; clean daily when menu covers, shakers, chair backs, or bathroom handles are frequently used.#@@#Additional Info#@#PartsTown TCB10-5 10" carbon block replacement reduces particulate and chlorine in foodservice water systems. Its dimensions (10.1" L, 2.8" W, 2.85" H, 0.84 lbs) fit standard housings, ensuring compliance and easy cartridge swaps.#@@#General Info#@#Description #@#
This 10" carbon block replacement filters particulates and chlorine taste while maintaining flow rates for busy kitchens and service lines. Facilities achieve consistent filtration performance with a compact cartridge that fits standard housings and minimizes downtime.
A dense carbon matrix targets chlorine, sediment, and organics right at the point of use. Tests on similar blocks show effective reduction of taste-and-odor compounds while preserving hydraulic throughput for continuous service.
Engineers designed this cartridge to deliver high flow at low pressure drop within a standard 10-inch housing. Installers will note minimal impact on pump sizing and pressure regulation across typical water systems in restaurants, cafeterias, hospitals, and bars.
The cartridge measures approximately 10.1 inches in length with a diameter near 2.8 inches and a height dimension around 2.85 inches for predictable fit. Service planners can verify housing clearance quickly using these nominal dimensions before procurement.
A single cartridge weighs about 0.84 pounds and supports extended run times depending on water quality and usage patterns. Maintenance teams receive consistent exhaustion indicators, enabling scheduled swaps to prevent service interruptions.
Manufacturers produce the block from activated carbon media optimized for potable systems and food service environments. Operators relying on compliance certifications should confirm local regulations and CSA listings where applicable.
Technicians replace the cartridge in minutes using standard tools and procedures, reducing labor cost per change. Facilities benefit from a straightforward swap sequence that limits service disruption during peak hours.
#@@#Delivery Details#@#
• Please ensure to handle the product with utmost care.
• Check if the product you have received has all the essential parts and accessories.
• Make sure to examine the product for damage before signing the delivery receipt.
• Contact customer service for delivery concerns.
• Delivery times may vary based on location.#@@#deliverynotes#@#NA#@@#Maintenance Guide#@#Inspect the TCB10-5 10" carbon block replacement monthly and record readings for flow and pressure. Remove and discard used cartridges following local disposal rules. Flush new cartridge with recommended volume of water until clear; measure in gallons or liters per facility protocol. Sanitize housings with approved agents and verify CSA-listed fittings and seals. Replace O-rings each service and torque fasteners to manufacturer specifications to prevent leaks.
